Powa Beam Quick Draw Remote w Thermal Compatibility

This kit includes 1x Powa Beam Quick Draw Spotlight Remote Control and an additional Ball Shaft with a thicker diameter to allow extra power up to your spotlight for thermal cameras etc.

Powa Beam Quick Draw Folding Spotlight Remote Control Handle features a large comfortable grip and a quick and easy folding mechanism.

• Quick Release Handle folds flush with roof
• Housing machined from aircraft grade alloy
• One piece steel ball joint with internal wiring
• Reversible long wearing, self-lubricating ball joint washers
• 50^o maximum tilt, 360^o maximum rotation
• Super smooth operation
• Switch conveniently located on handle
• Adjustable tension control from inside cabin with locking ring
• Handle folds down to approx. 350mm below roof
• For use with all Powa Beam Spotlights
• All parts are replaceable
• Will suit roof thickness of up to approx. 25mm
• Additional ball shaft supplied featuring an increased internal diameter to accommodate 3 wires (The negative, a switched positive for the light, and permanent power for thermal or another device)

FAQ's

What size is the nut on the top?
M12 x 1.25 (Standard)

My remote is brand new and makes a squeaking noise, can I lubricate it?
If remote squeaks when turned left or right it is generally the rubber boot rubbing on the top shaft. You can stop this by a placing a small amount of Inox or WD40 at the top lip of the rubber boot where it meets the shaft.
The washers are made to be self lubricating therefore should not need additional oiling.
If your remote is still squeaking, try a very small amount of Inox or WD40 at the top of the ball joint. Please note too much may cause the ball shaft to slip, therefore reducing its ability to hold tension.