Car can't start? Pump not working? Engine conked out? And you realise that they all have a common problem. Flat battery. Now you can prepare for such unforeseen circumstances with our high performance Giantz 20A Battery Charger.

Built to exacting standards, the Giantz 20A Battery Charger is your godsend in bringing life to dead batteries. Equipped with integrated Pulse Width Modulation (PWM) to prevent power loss, the Charger provides continuous charge to a 12V battery with an automatic floating charge mode to avoid overcharging damage. That means safe charging with total peace of mind.

The Giantz 20A Battery Charger is equally useful to you on the road as it is in your workshop, garage or shed. Never let your power down again as you power up with Giantz.

Features:
Fully automatic operating system
Output over voltage protection
Over temperature protection
Short circuit protection
Automatic voltage stabilisation
Lightweight and portable
High quality battery clips w/ 90cm cable
Suitable for both gel-cell or wet-cell lead acid batteries
SAA approved

Specifications:
Brand: Giantz
Input voltage (AC): 210V-240V, 50Hz
Output voltage (DC): 12V-14.7V
Charging current: 20A
Output power (HP): 250W
Dimensions: 20 x 11 x 6cm
Weight: 1.2kg
Number of Packages: 1
Assembly Required: No

Product Contents:
1 x Giantz 20A Battery Charger
1 x User Manual

12 Months Warranty

Features

• Set of 4 universal solar panel corner mounts, 2 Solar Side Mounts with 1 Waterproof Solar cable block
• Made from UV resistant ABS plastic, Environment Friendly and UV Resistance
• Can be used with any aluminium framed solar panel that has a side length of 30cm or more
• The mounts are ready to fix to solar panel and surface. If drilling, all fixing positions are marked on the brackets
• The mounts can be safely bonded to the surface regardless to drill holes
• The panel corner mounts protect the corners of the solar panels from damage
• Anti-reflective coating improves light absorption
• The mounts also act as a wind deflector and maintain a cooling air gap between the solar panel and the roof top/deck.

The ATEM POWER AGM battery, which has built-in pure lead grip and AGM separator for enhanced conductivity and electrolyte absorption and effective charge keeping, is all weather- and temperature-resistant, and this battery is also designed for a more efficient discharge recovery. Faster recharging technology and battery protection deliver reliable performance. The sealed structure, copper alloy terminals and factory sealed lid allow no leakage of any caustic chemicals, and ABS intrusion-safe body and heavy-duty posts ensure reliable performance against any drastic vibration's shocks or outer wreckage. This maintenance-free battery can be mounted in various positions, and also features longer shelf-life and excellent water retention performance. Its built-in strap offers excellent carrying experience. It emits steady 12V to power most motors, tractors and boats, etc. With ATEM POWER, you are fully equipped to rediscover the fun of off-road.

Please note: extra postage may apply for remote area.

Features

• Anti-Leakage Construction: Sealed structure, ABS intrusion-safe body and factory sealed lid ensure no leakage of any caustic materials.
• Weather & Temperature Resistant: All-weatherproof and able to work at temperatures down to -40 degrees Fahrenheit.
• Reliable Performance: Vibration and shockproof design and the ability to offer cranking to motors and work at temperatures down to -40 degrees Fahrenheit.
• Optimal Recovery Performance: The incorporation of high oxygen recombination tech ensures there is no loss of electrolyte for more efficient recovery.
• Faster Recharge: Our batteries recharge up to 5 times faster than flooded batteries, so you can enjoy the convenience of a battery that's always ready to go.
• Maintenance Free: Low self-discharge, less prone to sulfation and excellent water retention performance guarantee free maintenance.
• Longer Lifespan: This Deep Cycle Battery is low self-discharge, less prone to sulfation and excellent water retention which can be kept out of operation for a much longer period while preserving the perfect conductivity.
• Universal Application: Ready to power most 4wd vehicles, caravans, trailers, saltwater/marine applications, and 12V appliances.
• User Friendly Design: Built-in straps offer excellent carrying and mounting experience and ensure convenience during daily use.

This Australian Made Powa Beam 7” Spotlight is designed to be used as a searchlight from your vehicle or boat. It connects directly to your battery to ensure you have uninterrupted light all night long. It is our top selling size and popular among farmers and recreation shooters & fishers. 

Please note all Powa Beam Spotlights are made to order and can take between 1-2 weeks.

Specifications:

• Reflector Size – 175mm (Diameter)
• Casing Size – 195mm (Diameter) x 140mm (Depth)
• Voltage – 12V
• Power – 100W
• Nominal Luminous Flux – 3050lm
• Light Type – Quartz Halogen (QH)
• Beam Type – Adjustable from Spot to Spread
• Base – Pistol Grip Handle with 5/16 Thread
• Beam Distance – TBC
• UPC: 609722 855020

Main Components for Modifications & Repairs:

• Bulb: 12V 100W Vertical Filament
• Lens: Toughened Glass
• Reflector: Heat Resistant Alloy Reflector
• Case: Anodized Alloy
• Base: Pistol Grip Handle

Package Includes:

• Powa Beam 7” 100W QH Spotlight
• 3.5m Cable
• Battery Clips
• Powa Beam Bumper Sticker

SUPER LONG-RANGE PERFORMANCE from the largest Spotlight in our range!!

This Australian Made Powa Beam 11” Spotlight is designed to be used as a powerful searchlight mounted on the roof of your vehicle. It connects directly to your vehicle battery to ensure you have uninterrupted light all night long. This model is popular among those who believe SIZE MATTERS, and want the biggest, brightest light available. 

Specifications:

• Reflector Size – 285mm (Diameter)
• Casing Size - 305mm (Diameter) x 210mm (Depth)
• Voltage – 12V
• Power – 100W
• Nominal Luminous Flux – 3050lm
• Light Type – Quartz Halogen (QH)
• Beam Type – Adjustable from Spot to Spread
• Base – Steel Bracket with 12mm Mounting Hole
• Beam Distance – TBC
• UPC: 609722 855006

Main Components for Modifications & Repairs:

• Bulb: 12V 100W Vertical Filament
• Lens: Toughened Glass
• Reflector: Heat Resistant Alloy Reflector
• Case: Anodized Alloy
• Base: Powder Coated Custom Metal Bracket

Package Includes:

• Powa Beam 11” 100W QH Spotlight
• 3.5m Cable
• Electrical Connectors
• Battery Clips
• Toggle Switch
• Powa Beam Bumper Sticker

Spotlight Warranty:
Powa Beam’s limited warranty guarantees that all Powa Beam brand products are to be free from defects in materials and workmanship for the period of 3 YEARS after retail purchase from an authorized dealer. Please retain proof of purchase for warranty purposes.

This guarantee excludes, but is not limited to, damages from road hazards/accidents, improper installation (including wiring) or operation, modification, unauthorized repair, misapplication or deliberate damage. It also excludes any consequential damage or inconvenience caused by failure of the product. Powa Beam’s liability is limited to the repair or replacement at Powa Beam’ discretion. No warranty exists for bulbs, globes or lens unless specified.

This Australian Made Powa Beam 11” Spotlight is our brightest yet, if you want the best, here it is! Designed to be fixed mounted onto a Powa Beam Remote, you will not be disappointed.

Please note all Powa Beam Spotlights are made to order and can take between 1-2 weeks.

Specifications:

• Reflector Size – 285mm (Diameter)
• Casing Size - 305mm (Diameter) x 210mm (Depth)
• Voltage – 12V with a step up converter to 24V
• Power – 250W
• Nominal Luminous Flux – 8200lm
• Light Type – Quartz Halogen (QH)
• Beam Type – Adjustable from Spot to Spread
• Base – Steel Bracket with 12mm Mounting Hole
• Beam Distance – TBC
• UPC: 610969 087690

 *NOTE:

• On Standby this Light will draw approx. 100mA, we suggest using a 25amp Isolation Switch
• In use this Light will draw approx. 22amp from the battery to the converter & approx. 10amp from the convertor to the spotlight

Main Components for Modifications & Repairs:

• Bulb: 24V 250W Vertical Filament
• Lens: Toughened Glass
• Reflector: Heat Resistant Alloy Reflector
• Case: Anodized Alloy
• Base: Powder Coated Custom Metal Bracket

Package Includes:

• Powa Beam 11” 250W QH Spotlight
• 3.5m Cable
• Electrical Connectors
• Toggle Switch
• 1.5m 6mm Cable with Anderson Style Plug Connection
• Maxi Fuse Holder
• 30 Amp Fuse
• 20 Amp Switch
• Powa Beam Bumper Sticker

Spotlight Warranty

• Powa Beam’s limited warranty guarantees that all Powa Beam brand products are to be free from defects in materials and workmanship for the period of 3 YEARS after retail purchase from an authorized dealer. Please retain proof of purchase for warranty purposes.
• This guarantee excludes, but is not limited to, damages from road hazards/accidents, improper installation (including wiring) or operation, modification, unauthorized repair, misapplication or deliberate damage. It also excludes any consequential damage or inconvenience caused by failure of the product. Powa Beam’s liability is limited to the repair or replacement at Powa Beam’ discretion. No warranty exists for bulbs, globes or lens unless specified.

Quick Draw Remote Control Handle – Recommended when installing your light on top of your car roof

We have built this light to be the best!

This Australian Made Powa Beam 9” Spotlight is designed to be used as a powerful searchlight from your vehicle or boat. It connects directly to your vehicle battery to ensure you have uninterrupted light all night long. This model is popular among farmers, recreation shooters & is the light of choice by many professional shooters. If you are looking for something a bit smaller.

This model is popular among farmers, recreation shooters & is the light of choice by many professional shooters.

Please note all Powa Beam Spotlights are made to order and can take between 1-2 weeks.

Specifications:

• Reflector Size – 245mm (Diameter)
• Casing Size - 265mm (Diameter) x 190mm (Depth)
• Voltage – 12V
• Power – 100W
• Nominal Luminous Flux – 3050lm
• Light Type – Quartz Halogen (QH)
• Beam Type – Adjustable from Spot to Spread
• Base – Steel Bracket with 12mm Mounting Hole
• Beam Distance – TBC
• UPC: 609722 855013

Main Components for Modifications & Repairs:

• Bulb: 12V 100W Vertical Filament
• Lens: Toughened Glass
• Reflector: Heat Resistant Alloy Reflector
• Case: Anodized Alloy
• Base: Powder Coated Custom Metal Bracket

Package Includes:

• Powa Beam 9” 100W QH Spotlight
• 3.5m Cable
• Electrical Connectors
• Battery Clips
• Powa Beam Bumper Sticker

Spotlight Warranty

• Powa Beam’s limited warranty guarantees that all Powa Beam brand products are to be free from defects in materials and workmanship for the period of 3 YEARS after retail purchase from an authorized dealer. Please retain proof of purchase for warranty purposes.
• This guarantee excludes, but is not limited to, damages from road hazards/accidents, improper installation (including wiring) or operation, modification, unauthorized repair, misapplication or deliberate damage. It also excludes any consequential damage or inconvenience caused by failure of the product. Powa Beam’s liability is limited to the repair or replacement at Powa Beam’ discretion. No warranty exists for bulbs, globes or lens unless specified.

Precautions:

• Do not touch the HID bulb, ballast and cord after turning on the system: It generates 20,000 voltage while turned on and may cause burns or fatal accidents by electric shock, as well as shorten the lifespan of the bulb.
• Do not turn on/off frequently: It will shorten the lifespan of the bulb. It may also cause the HID bulb not to turn on which is an indication that the safety circuit is activated on the ballast and it is not a fault. Wait a while then turn it back on.
• If HID turns off while in use: Turn it off at the switch and wait approximately 15min then turn it on again. If the bulb returns to its normal condition then this indicates that a safety switch was activated and you can continue using the light. If there is no improvement then contact the store you purchased the light from.

This Australian Made Powa Beam 9” Spotlight is designed to be used as a powerful searchlight from your vehicle or boat. It connects directly to your vehicle battery to ensure you have uninterrupted light all night long. This model is popular among farmers, recreation shooters & is the light of choice by many professional shooters.

Please note all Powa Beam Spotlights are made to order and can take between 1-2 weeks.

Specifications:

• Reflector Size – 245mm (Diameter)
• Casing Size - 265mm (Diameter) x 190mm (Depth)
• Voltage – 12V
• Power – 100W
• Nominal Luminous Flux – 3050lm
• Light Type – Quartz Halogen (QH)
• Beam Type – Adjustable from Spot to Spread
• Base – Pistol Grip Handle with 5/16 Thread
• Beam Distance – TBC
• UPC: 609722 855013

Main Components for Modifications & Repairs:

• Bulb: 12V 100W Vertical Filament
• Lens: Toughened Glass
• Reflector: Heat Resistant Alloy Reflector
• Case: Anodized Alloy
• Base: Pistol Grip Handle

Package Includes:

• Powa Beam 9” 100W QH Spotlight
• 3.5m Cable
• Battery Clips
• Powa Beam Bumper Sticker

This Australian Made 145mm Spotlight is designed to be used as a searchlight from your vehicle or boat. It connects directly to your battery to ensure you have uninterrupted light all night long. It is our most lightweight for easier portability, and is least expensive spotlight. If you are looking for more light, but still lightweight we suggest checking out our 7” spotlights!

Please note all Powa Beam Spotlights are made to order and can take between 1-2 weeks.

Specifications:

• Reflector Size – 145mm (Diameter)
• Casing Size – 165mm (Diameter) x 135mm (Depth)
• Voltage – 12V
• Power – 100W
• Nominal Luminous Flux – 3050lm
• Light Type – Quartz Halogen (QH)
• Beam Type – Adjustable from Spot to Spread
• Base – Pistol Grip Handle with 5/16 Thread
• Beam Distance – TBC
• UPC: 609722 855037

Main Components for Modifications & Repairs:

• Bulb: 12V 100W Vertical Filament
• Lens: Toughened Glass
• Reflector: Heat Resistant Alloy Reflector
• Case: Anodized Alloy
• Base: Pistol Grip Handle

Package Includes:

• Powa Beam 145mm 100W QH Spotlight

• 3.5m Cable
• Battery Clips
• Powa Beam Bumper Sticker

This Australian Made 145mm Spotlight is designed to be used as a searchlight from your vehicle or boat. It connects directly to your battery to ensure you have uninterrupted light all night long. It is our most lightweight for easier portability, and is least expensive spotlight. 

Please note all Powa Beam Spotlights are made to order and can take between 1-2 weeks.

Specifications:

• Reflector Size – 145mm (Diameter)
• Casing Size – 165mm (Diameter) x 135mm (Depth)
• Voltage – 12V
• Power – 100W
• Nominal Luminous Flux – 3050lm
• Light Type – Quartz Halogen (QH)
• Beam Type – Adjustable from Spot to Spread
• Base – Steel Bracket with 9mm Mounting Hole
• Beam Distance – TBC
• UPC: 609722 855037

Main Components for Modifications & Repairs:

• Bulb: 12V 100W Vertical Filament
• Lens: Toughened Glass
• Reflector: Heat Resistant Alloy Reflector
• Case: Anodized Alloy
• Base: Powder Coated Custom Metal Bracket

Package Includes:

• Powa Beam 145mm 100W QH Spotlight
• 3.5m Cable
• Electrical Connectors
• Battery Clips
• Powa Beam Bumper Sticker

*Not to be rigid mounted

*This spotlight is not an Adjustable Focus Beam light.

This Powa Beam setup is the perfect combo for recreational shooters, as it doesn't require you to make permanent modifications to your vehicle! The Lightweight Remote Handle has a comfortable grip, and switch near the hand for easier use. The Powa Strut Window Mount enables you to fix your spotlight to your door frame without the need to modify your vehicle. This allows you to easily control the light angle and direction using the remote handle so you can spot your target easily. The extra strong, adjustable double gas strut system allows it to quickly attach to most vehicles and the door can still be open and closed without restriction.

SPOTLIGHT NOT INCLUDED

Powa Strut Window Mount Features:

• Versatile, adjustable strut operated mounting system
• Attaches to almost any vehicle window frame in seconds
• Allows door to be opened & closed without any restrictions
• No modifications to vehicle necessary
• Strong steel construction
• To fit spaces between 310mm & 520mm
• Spotlight and handle not included
• May be ordered with handle in a combo

Lightweight Spotlight Remote Handle Features:

• Cast alloy housing, powder coated finish
• Zinc plated steel ball joint and detachable shaft
• Length is 230mm from the base of the housing, to the centreline of the handle
• Best suited to smaller spotlights e.g. Powa Beam PL175WB 7" Spotlight
• All parts are replaceable

Combo Includes:

• 1x Powa Strut Window Bracket
• 1x Powa Beam RC220 (Lightweight Spotlight Remote Handle)

FAQ
This system is designed for a standard Powa Beam RC220 (Lightweight Spotlight Remote Handle) however should you wish to you can fit a Powa Beam RC500 (Quick Draw Spotlight Remote Handle) to this instead. To do this you will need to lightly file the inside of the plate. You will also need to mount it underneath the plate (not half on top and half on bottom) and fix it with the screws from the top.

Olight Javelot Pro 2 Hunter’s Kit – Built for the Hunt, Trusted by Professionals

The Olight Javelot Pro 2 is a high-performance long-throw LED torch, designed for hunters, law enforcement, and anyone who needs serious lighting power in the field. With a jaw-dropping 1050m beam distance and a max output of 2500 lumens, this torch cuts through the darkness like a spotlight on steroids.

Powered by a built-in battery pack featuring 2 x 5000mAh 21700 batteries, it’s ready for extended missions, long nights, and off-grid hunts. Its Cree XHP35 HI neutral white LED delivers a clean, focused beam, while the magnetic tailcap allows for easy charging and remote switch use.

Key Features:
🔦 2500 Lumens Max Output
🎯 1050m Beam Throw – Ideal for spotlighting, hunting & search and rescue
💡 Cree XHP35 HI Neutral White LED
🔌 Magnetic Tailcap – For charging & remote switch attachment
🔋 Integrated 10,000mAh Battery Pack (2x 21700 cells)
💧 IPX8 Waterproof – Built for all weather conditions
📏 Dimensions: 259 x 63 x 26mm | ⚖️ Weight: 423g

What’s Included in the Hunter’s Kit:
✅ Olight Javelot Pro 2 LED Torch
✅ ROD Magnetic Remote Switch
✅ Red & Green Filters – Great for stealth and preserving night vision
✅ Scope Mount – Torch it up straight from your rifle
✅ MCC3 Magnetic USB Charging Cable
✅ Hard Storage Case – Keep everything safe & ready to roll

Perfect for night hunting, patrol work, search and rescue, or anyone needing long-range illumination they can rely on.

The Powa Beam Lightweight Spotlight Remote Handle has a cast alloy housing with a powdered finish. The length is averagely 23cm from base to centre line of the handle and gives you the ability to attach a switch near the hand for easier use.

Features:

• Cast alloy housing, powder coated finish
• Zinc plated steel ball joint and detachable shaft
• Length is 230mm from the base of the housing to the centreline of the handle
• Best suited to smaller spotlights e.g. Powa Beam PL175WB 7" Spotlight
• Also recommended for use with the RCWRX Powa Strut Window Mount for those who want to avoid mounting through roof
• All parts are replaceable

Includes:

• 1x Remote Control
• 1x Switch

With a profile as slim as 5cm, ATEM POWER 100Ah slimline lithium battery is your ultimate solution for limited space installation, whether tucked behind or under a seat or at the back of your 4x4, providing unmatched power where conventional LiFePO4 batteries won't fit. Crafted with A grade prismatic cells, our slimline lithium iron battery excels in energy density and consistency, serving as a reliable energy source for various applications, including camping fridges, 12V lights, and high power appliances such as electric ovens and space heaters. Our slimline lithium iron phosphate battery is perfect for use with caravans, camper trailers, motor homes and 4x4. The SPCC enclosure, manufactured to Japanese standard JIS G 3141, is 20% stronger than typical hot rolled steel to protect battery cells. Our lithium ion slim battery provides impressive lifespan of 2,000 cycles with 80~90% usable capacity, delivering exceptional longevity and optimal performance.

Please note: extra postage may apply for remote area.

NOTE: Please do not use 'P.O. Box' as your mailing address

Features

• Remarkably Slimline: Measuring as thin as 5cm, ATEM POWER 100Ah slimline lithium battery easily fits behind or underneath seats, or at the rear of your 4x4.
• SPCC Enclosure: The Japanese standard SPCC steel with glossy finish offers 20% more strength than standard hot rolled steel for superior cell protection.
• A Grade Cell: Crafted with A grade prismatic cells, our LiFePO4 battery boasts higher energy density and consistency, while being more resistant to vibration-induced failures.
• Extended Lifespan: Our LiFePO4 battery provides impressive 2,000 rounds of usage with 80~90% usable capacity, significantly outlasting its lead-acid counterparts.
• Lightweight Design: Our slimline lithium iron battery delivers twice the power of a comparable AGM battery with half the weight, even within a SPCC steel enclosure.
• High Power Output: With max 200A (≤7S) / continuous 100A discharge current, our LiFePO4 battery powers high wattage appliances like microwaves or coffee machines.
• Rapid Charging: Featuring low internal resistance, our LiFePO4 battery boasts swift charging capability for a quick recharge process and shorter downtime between uses.
• High Quality BMS: It offers precise voltage and temperature monitoring with smart cell balancing for enhanced reliability, and low self-discharge rate for sustained charge.
• Real Time Monitoring: The volt meter displays the capacity and voltage, while the dual 120A Anderson style plugs facilitate high current charging and discharging.
• Flexible Configurations: You can connect two slimline lithium iron phosphate batteries in series or parallel to achieve your desired voltage and amp-hour capacity.

SAN HIMA portable hot water system is the ultimate luxury for nature lovers. While air conditioning and plush beds may be sacrifices you make, hot water no longer has to be one of them. Our hot water system delivers impressive 8 litres of hot water per minute, ensuring you never have to compromise on comfort. Designed for convenience, our hot water system provides instant hot water as long as you have access to a water source and a gas bottle. With its versatile functionality, you can enjoy a refreshing shower, wash your dog, camping gear, or even your car. Our gas hot water system offers the convenience of a summer mode for gentle water heating and a winter mode for those chilly nights when hot water is a necessity. Take full control of your experience with the ability to adjust the gas and water flow precisely. And our instant hot water heater is gas safety certified, ensuring a secure and worry-free experience for your outdoor activities.
Features

• Instant Hot Water: SAN HIMA gas hot water system provides up to 8 L/M of instant hot water when connected to a water source and gas bottle.
• Self-Igniting: Our gas hot water system features an intelligent self-ignition mechanism that automatically activates as soon as water begins to flow.
• Seasonal Modes: Choose the summer mode for gentle water temperature, ideal for warmer days, or switch to the winter mode for hot water supply during chilly nights.
• Complete Control: You have precise control over both the temperature and water pressure, allowing you to customize your showers to suit your preferences.
• Real-Time Display: Our portable hot water system provides you with a clear & accurate real-time temperature reading, so you can easily monitor and adjust as needed.
• Gas Safety Certified: Our instant hot water heater has undergone rigorous quality and safety standard checks by IAPMO R&T OCEANA (GasMark GMK 10498).
• Enhanced Protection: Our hot water system offers safety water temperature cut off control (above 45±3℃), anti-dry combustion, over-pressure and flameout protection.
• Premium Shower Head: Our shower head features an ON/OFF switch and offers three adjustable spray patterns, and a robust shower head holder is added for easy mounting.
• Flexible Water Supply: The efficient pump allows water drawing from mains water supply, portable tanks, or reservoirs, complete with dual power cables for easy connection.
• Convenient Carry Handle: Our portable hot water system features a practical carry handle that can be used for easy mounting or effortless transport.

Made from 4 ply non-woven polypropylene to ensure durability, the cover spans the entire
roof of a caravan and it water/UV resistant.

Features
* Heavy Duty 4 layer non-woven polypropylene
* Water Resistant, UV stable and breathable material for maximum protection
* Protects against harsh climate condition
* Elasticated Hem
* Straps and buckles
* Zip openings for easy fittings and access
* Tough interlocking seams
* Free Storage Bag

Specifications
* Material: Polypropylene
* Colour: Grey
* Product Dimension: 4.36/4.97M x 2.4M x 2.2M
* Applicable caravan size: Roof length of 426cm / overall length of 487cm

Package Contents
1 x Caravan Cover
1 x Carry Bag

 Our Weisshorn Annex Matting makes for a great travelling and camping companion where extra ground needs to be covered (quite literally).

Made from foamed PVC that is soft, porous and breathable, the Annex Matting is permitted for use in caravan parks and more. It's also ideal for laying on grass, stone or rough surfaces to create a comfortable sitting and lying area. Thanks in part to the rubber-like feel of the mesh matting that is also non-slip. The matting is also UV-treated and mould and mildew-resistant.

And when all is done, fold the 600GSM heavy-duty Annex Matting into an easy carry-on bag for your next road trip destination. Happy trails, people! 

Features
Heavy-duty
UV treated
Porous and breathable
Mould and mildew resistant
Caravan parks permissible
Non slip
Bonus carry bag

Specifications:
Material: 600gsm foamed PVC
Dimensions: 4m x 2.5m
Colour: Grey
Carry bag dimension: 54 x 45 x 14cm

Package Content
1 x Annex Matting
1 x Carry Bag

The Gentrax 1.2kW Inverter Generator is a must-have for any outing. This camping generator is backed with a 4-stroke engine coupled with a recoil start for easy, stable performance with every use. It produces a Pure Sine Wave output as well, which makes it ideal for powering even your most sensitive devices. Get power that won't let you down with a discreet, six-hour run time at 58dB @ 7m - this quiet generator is just what you need for a peaceful weekend enjoying the outdoors.

All Gentrax generators come with a 12 month warranty

FEATURES
Pure Sine Wave output
4-stroke engine
Easy recoil start
Quiet run time at 58dB @ 7m
3L fuel tank
6.3 hours (50% load) of operation on a single tank
Overload & thermal protection
Compact & portable
Multi-option charging station
Euro 5 certified

SPECIFICATIONS
Max. Output: 1.2kW
Rated Output: 1.0KW
Start Type: Pull start
AC Voltage: 240V
DC Output: 12V / 4.0A
Number of AC Outlets: 1
Fuel Type: 91 RON
Fuel Tank Capacity: 3 Litres
Oil Type: SAE 10W30
Oil Capacity: 0.35 Litre
Noise Level: 58 dB (7m)
Rated Continuous Operation: 6.3 hrs (50% load)
Dimensions: 448 x 236 x 392mm
Weight: 12.5 kg

PACKAGE CONTENTS
1 x Generator
1 x Generator Cover
1 x Funnel
1 x Battery Charger Cable
1 x Maintenance Tools

Ideal for day trips, the Gentrax 800W Mini Inverter Generator is the true definition of small yet powerful. This handy unit houses a 2.1L fuel tank that gives you up to 6.1 hours of smooth operation at 50% load. The 40cc engine coupled with a Pure Sine Wave output ensures not just efficiency but also stable power suitable for sensitive equipment. Maintenance is also easy with its low oil and overload protection plus, at 8.5kgs, this is one of your handiest option for powering your outings!

All Gentrax generators come with a 12 month warranty

FEATURES
Ultra-portable at 8.5kgs
4-stroke 40cc engine
Pure Sine Wave output
Quiet operation at 58dB @ 7m
2.1L capacity
6.1 hours run time at 50% load
Low oil and overload protection
Fuel-efficient
Includes accessories
Euro 5 certified

SPECIFICATIONS
Max. Output: 0.8kW
Rated Output: 0.7kW
Start Type: Pull start
AC Voltage: 240V
DC Output: 12V / 4.0A
Number of AC Outlets: 1
Fuel Type: 91 RON
Fuel Tank Capacity: 2.1 Litres
Oil Type: SAE 10W30
Oil Capacity: 0.30 Litre
Noise Level: 58 dB (7m)
Rated Continuous Operation: 6.1 hrs (50% load)
Dimensions: 395 x 209 x 355mm
Weight: 8.5 kg

PACKAGE CONTENTS
1 x Generator
1 x Generator Cover
1 x Funnel
1 x Battery Charger Cable
1 x Maintenance Tools

Upgrade your camping experience with the Gentrax 2.5kW Inverter Generator. It's the perfect size for most outdoor trips plus the quality is a win in all aspects - durability, efficiency, and longevity! Featuring a 4-stroke engine plus Pure Sine Wave output, this unit is designed to provide the most stable power even for sensitive devices. It also allows you to switch to economy mode for maximum fuel efficiency plus, both you and your fellow campers will love the super quiet run time at 62dB @ 7m. Get yours today and gear up for your next adventure!

All Gentrax Generators come with a 12 month warranty

FEATURES
Economy mode for fuel efficiency
Quiet run time at 62dB @ 7m
4-stroke engine
Pure Sine Wave output
Low oil & overload protection
Automatic throttle
5.7L fuel tank
8.1 hours of operation at 50% load
Pull start
Lightweight at 28kgs

SPECIFICATIONS
Max. Output: 2.5kW
Rated Output: 2.2kW
Start Type: Recoil Starter
AC Voltage: 240V
DC Output: 12V / 8.3A
Number of AC Outlets: 2
Fuel Tank Capacity: 5.7 Litres
Oil Type: SAE 10W30
Oil Capacity: 1 Litre
Noise Level: 62dB (7m)
Rated Continuous Operation: 8.1 hrs (50% load)
Dimensions: 565 x 320 x 470mm
Weight: 28 kg

PACKAGE CONTENTS
1 x Generator
1 x Generator Cover
1 x Funnel
1 x Battery Charger Cable
1 x Maintenance Tools

Our Weisshorn Annex Matting makes for a great travelling and camping companion where extra ground needs to be covered (quite literally).

Made from foamed PVC that is soft, porous and breathable, the Annex Matting is permitted for use in caravan parks and more. It's also ideal for laying on grass, stone or rough surfaces to create a comfortable sitting and lying area. Thanks in part to the rubber-like feel of the mesh matting that is also non-slip. The matting is also UV-treated and mould and mildew-resistant.

And when all is done, fold the 600GSM heavy-duty Annex Matting into an easy carry-on bag for your next road trip destination. Happy trails, people!

Features
Heavy-duty
UV treated
Porous and breathable
Mould and mildew resistant
Caravan parks permissible
Non slip
Bonus carry bag

Specifications:
Material: 600gsm foamed PVC
Dimensions: 6m x 2.5m
Colour: Grey
Carry bag dimension: 54 x 45 x 21cm

Package Content
1 x Annex Matting
1 x Carry Bag

Delivery excludes the following postcodes:
885, 2222, 2449, 2818, 2827, 2829, 2836, 2839, 2874, 2898, 3724, 4477
4490, 4626, 4822, 4871, 4875, 6044, 6209, 6224, 6290, 6442, 6536, 6562
6707, 6713, 6725, 6728, 6743, 6751, 6753, 6754, 7255, 7256, 7258, 7260

 Our Weisshorn Annex Matting makes for a great travelling and camping companion where extra ground needs to be covered (quite literally).

Made from foamed PVC that is soft, porous and breathable, the Annex Matting is permitted for use in caravan parks and more. Its also ideal for laying on grass, stone or rough surfaces to create a comfortable sitting and lying area. Thanks in part to the rubber-like feel of the mesh matting that is also non-slip. The matting is also UV-treated and mould and mildew-resistant.

And when all is done, fold the 600GSM heavy-duty Annex Matting into an easy carry-on bag for your next road trip destination. Happy trails, people!

Features
Heavy-duty
UV treated
Porous and breathable
Mould and mildew resistant
Caravan parks permissible
Non slip
Bonus carry bag

Specifications:
Material: 600gsm foamed PVC
Dimensions: 7m x 2.5m
Colour: Grey
Carry bag dimension: 54 x 45 x 25
cm

Package Content
1 x Annex Matting
1 x Carry Bag

Delivery excludes the following postcodes:
885, 2222, 2449, 2818, 2827, 2829, 2836, 2839, 2874, 2898, 3724, 4477
4490, 4626, 4822, 4871, 4875, 6044, 6209, 6224, 6290, 6442, 6536, 6562
6707, 6713, 6725, 6728, 6743, 6751, 6753, 6754, 7255, 7256, 7258, 7260

• Bifacial Evolution: With a 200W primary side, and a 105W back side for ambient light, you can catch up to 15% more energy than traditional mono facial solar panels.
• More Energy Generation: Never miss out on energy with our PERC and bypass diodes. Our shingled bifacial solar panel excels in partial shade and snowy conditions.
• Shingled Cell Tech: Shingled tech uses a string of strips and ECA that ensures 15~20% more output compared with traditional mono facial solar panels
• Less Energy Loss: The shingled cells are wired in parallel that significantly reduces the losses and hotspot effect caused by shade compared with traditional panel.
• Unbeatable Rigidity: Aluminium frame and tempered glass ensure this shingled solar panel withstands wind loads of up to 2,400Pa and snow loads of up to 5,400Pa.
• All Weatherproof: Rain or shine, our shingled bifacial solar panel's IP68 waterproof rating keeps your electronics running, worry-free.
• Diverse Application: The ATEM POWER 200W shingled solar panel is perfect for off-grid applications including RVs, rooftops, cabins, yachts, sunrooms and more!
• More Aesthetic: Sleek and circuitry-free, our shingled bifacial solar panel adds a clean and stylish touch while delivering unmatched performance.

If you love driving out into nature and stay there for several days. One of the most enjoyable aspects is to cook meals while surrounded by scenic environments. Though a 12V fridge will keep your produce fresh, the ATEM POWER 12v fridge wiring kit/fridge wiring kit enables you to power your 12V fridges effortlessly. This 12v fridge wiring kit includes a cig plug, whose terminals can be disconnected for flush mount, that can be installed in a readily accessible location. Then just plug the connector in to get your fridge powered. This fridge wiring kit also comes with a replaceable 25A in-line blade fuse that protects the 12v fridge wiring kit and your electrical equipment from electrical damages. This kit features a 12AWG copper wire (6-meter long), which is wrapped in a flexible automotive-grade PVC jacket. That gives this 12V fridge wiring kit more strength, flexibility, and protection against heat and vibrations so you can rely on it for a long time to come.
Features

• Easy Installation: This kit, including a flush mountable cig plug with detachable terminals, is designed to be installed in a readily accessible location.
• Plug & Play: The ATEM POWER 12v fridge wiring kit/fridge wiring kit is compatible with almost all 12V fridges, just plug it in, and you’re good to go.
• In-line Blade Fuse: This fridge wiring kit also includes a replaceable 25A fuse that protects the 12v fridge wiring kit and the electrical equipment of your 4x4.
• Thick 12AWG Wiring: This 12v fridge wiring kit features a thick 12AWG wiring that will reduce the voltage drop to efficiently power your fridge.
• 6m Cable: The ATEM POWER 12v fridge wiring kit/fridge wiring kit includes a 6-meter long cable the can easily fit virtually all vehicles.
• Weatherproof Jacket: Vibration resistant and weatherproof, this automotive grade PVC jack is designed for harsh off-road conditions.

Whether you're venturing into the mountains or enjoying a beach getaway, our fire pit ensures you can enjoy the warmth of a fire without the need for a pre-established fire pit or the hassle of starting one from scratch. Our fire pit can be easily set up and transformed into a BBQ, perfect for on-the-go adventurers. Measuring 435 x 435mm, SAN HIMA camping fire pit provides ample room for you and your companions to gather around and enjoy the warmth of a campfire. The enlarged 304 food-grade stainless steel grill provides ample cooking space and simplifies the cleaning process. With upgraded smooth right angles & rolled edges, the grill bridge eliminates the risk of hand cuts during assembly. Our fire pit kit includes two side plates, perfect for keeping spice jars and BBQ tools within reach. Featuring compact design, our stainless-steel fire pit can be packed up flat for effortless storage and transport.
Features

• Effortless Setup: SAN HIMA folding fire pit can be easily and quickly set up or detached in a matter of seconds, requiring no tools whatsoever.
• Convenient Carry Handles: Featuring heavy-duty stainless steel carry handles, our fire pit kit enables you to effortlessly move it even when a fire is blazing.
• Diverse Applications: Our fire pit is a perfect companion for various settings, from the campsite to your backyard, effortlessly transforming into a BBQ with the added grill.
• Stainless Steel Grill: It is crafted from 304 food-grade stainless steel for exceptional durability & cleanliness, while its 437*318mm size provides ample cooking space.
• Adjustable Grill Height: The grill bridge provides four different height levels for precise temperature control, while its smooth right angles and rolled edges prevent cuts.
• Exclusive Side Plates: Two convenient side plates serve as perfect spots to store your spice jars and BBQ tools, ensuring everything you need is within arm's reach.
• Included Coal Bed: The coal bed provides a flat surface for charcoal or heat beads, promoting airflow and optimal fuel combustion.
• Enhanced Comfort: Elevating the heat source off the ground, our stainless-steel fire pit brings the warmth closer to you, creating a cosier ambiance.
• Safe Design: The base plate not only provides an additional layer of protection for the grass underneath but also ensures exceptional stability with four secure clips.
• Hassle-Free Storage: Easily pack up the camping fire pit and grill bridge flat for convenient transport and storage in the included 600D Oxford fabric bag.

Enhance your camping experience with Lightfox LED camp light bar kit, perfect for creating a cosy atmosphere at your campsite or while on the road. With powerful yet gentle illumination, our LED camp lights are designed for larger rigs and offers convenient lighting for caravans, campers, and remote overnight spots. Our LED camp light bars provide versatile installation options to meet your needs. Easily mount them along the side of your awning or attach them to the edge of your outdoor table. Thanks to built-in magnets, Velcro tapes & 3 extension cables, setting up our IP67 rated LED strip lights has never been more convenient. With remarkable 600lm output per bar and wide 180° beam of light, our LED camp light bars offer exceptional brightness while consuming minimal power. You can leave them on overnight without worrying about draining your battery. Our camp light kit includes 4 white bars and 2 orange bars for a bug-free campsite, especially around food preparation & dining areas.
Features

• Infinitely Versatile: Illuminate your campsites, canopies, awnings, campers, caravans, 4WDs, tailgates, and home workshops with our all-purpose LED camp lights.
• Effortless Mounting: Easily attach our LED camp light bars to your roof rack, gazebo, or awning using the built-in magnets and included Velcro tapes.
• Hassle-Free Setup: Our LED strip lights feature plug-and-play design, allowing you to connect each section effortlessly for individual or multiple layout options.
• Exceptionally Bright: Enjoy 180 degrees of bright and soft illumination with Lightfox LED camp light bars, delivering 600lm per bar (white setting).
• Reliable Protection: With circuitry and LEDs encased in high-grade silicone and waterproof connector, our camp light kit provides IP67 protection against dust and water.
• Sturdy and Stylish: Crafted from 6063 aluminium alloy, our LED light strip casing boasts a thicker profile, enhancing both strength and visual appeal.
• Energy Efficient: Leave our LED camp light bar kit on all night without worrying about battery drainage, thanks to its low power consumption.
• Bug-Free Solution: In addition to the white option, the orange LED wavelength keeps bugs away, providing a pest-free campsite experience.
• Adjustable Light Intensity: Easily adjust the light intensity with the simple rotary dimmer switch for personalized illumination.
• All-Inclusive Kit: Our kit includes six magnetic LED camp lights, a dimmer switch, three extension cables, Velcro tapes, an adapter, a quick connector & a handy carry bag.

Rechargeable LED Spotlight. Perfect for hunting at distances up to 500m and easy to recharge with the included 12v car charger. 

Lightweight for easy use with ergonomic pistol grip

Features 

• 1200Lm
• CREE T6 LED- 15w
• 140mm reflector size
• Rechargeable 3.7v 4Ah lithium battery
• Approx. runtime 2hrs
• Approx. charge time 8hrs
• IP65
• Waterproof, Dustproof, Shockproof 
• Nylon housing 
• 12 Month Warranty

12v LED Spotlight. Perfect for hunting at distances up to 500m 

Lightweight for easy use with ergonomic pistol grip

Features 

• 1200Lm
• CREE T6 LED- 15w
• 140mm reflector size
• 12v plug
• 3-amp 250v glass fuse
• IP65
• Waterproof, Dustproof, Shockproof 
• Nylon housing 
• 12 Month Warranty

SAN HIMA portable hot water system is the ultimate luxury for nature lovers. While air conditioning and plush beds may be sacrifices you make, hot water no longer has to be one of them. Our hot water system delivers impressive 8 litres of hot water per minute, ensuring you never have to compromise on comfort. Designed for convenience, our hot water system provides instant hot water as long as you have access to a water source and a gas bottle. With its versatile functionality, you can enjoy a refreshing shower, wash your dog, camping gear, or even your car. Our gas hot water system offers the convenience of a summer mode for gentle water heating and a winter mode for those chilly nights when hot water is a necessity. Take full control of your experience with the ability to adjust the gas and water flow precisely. And our instant hot water heater is gas safety certified, ensuring a secure and worry-free experience for your outdoor activities.
Features

• Instant Hot Water: SAN HIMA gas hot water system provides up to 8 L/M of instant hot water when connected to a water source and gas bottle.
• Self-Igniting: Our gas hot water system features an intelligent self-ignition mechanism that automatically activates as soon as water begins to flow.
• Seasonal Modes: Choose the summer mode for gentle water temperature, ideal for warmer days, or switch to the winter mode for hot water supply during chilly nights.
• Complete Control: You have precise control over both the temperature and water pressure, allowing you to customize your showers to suit your preferences.
• Real-Time Display: Our portable hot water system provides you with a clear & accurate real-time temperature reading, so you can easily monitor and adjust as needed.
• Gas Safety Certified: Our instant hot water heater has undergone rigorous quality and safety standard checks by IAPMO R&T OCEANA (Gas Mark GMK 10498).
• Enhanced Protection: Our hot water system offers safety water temperature cut off control (above 45±3℃), anti-dry combustion, over-pressure and flameout protection.
• Premium Shower Head: Our shower head features an ON/OFF switch and offers three adjustable spray patterns, and a robust shower head holder is added for easy mounting.
• Flexible Water Supply: The efficient pump allows water drawing from mains water supply, portable tanks, or reservoirs, complete with dual power cables for easy connection.
• Easy Connection: With convenient quick fittings, the installation process of our hot water system is simplified, saving you time and effort.