• Set of 4 universal solar panel corner mounts, 2 Solar Side Mounts with 1 Waterproof Solar cable block
• Made from UV resistant ABS plastic, Environment Friendly and UV Resistance
• Can be used with any aluminium framed solar panel that has a side length of 30cm or more
• The mounts are ready to fix to solar panel and surface. If drilling, all fixing positions are marked on the brackets
• The mounts can be safely bonded to the surface regardless to drill holes
• The panel corner mounts protect the corners of the solar panels from damage
• Anti-reflective coating improves light absorption
• The mounts also act as a wind deflector and maintain a cooling air gap between the solar panel and the roof top/deck.

If you’ve been searching for a solar controller that reigns supremacy in energy conversion, this solar MPPT controller by ATEM POWER must be the top candidates on your list. Supported by innovative MPPT tech to rapidly track and capture the maximum power point of multi wave peak, this MPPT controller delivers up to 94% energy conversion efficiency, higher than 75% of PWM solar controllers. Not only that, but this controller comes packed full of safety protections, including reverse polarity, over-charge/discharge, over load/temperature, back feeding (night) & short circuit protection. Featuring the cover which protects terminals against corrosion and shorting, this MPPT controller is made of tough ABS housing with upgraded aluminium heat sinks. This durable unit is a great addition to any solar panel system for its multi-stage properties that better support batteries and compatibility with a variety of lead acid deep cycle batteries and LiFePO4 batteries.

Features

• Premium Energy Harvest: It features conversion efficiency of up to 94%, higher than 75% of PWM solar controllers, and will intelligently achieve full charge.
• Innovative MPPT Tech: The maximum power point of multi wave peak will always be rapidly and automatically captured.
• Multi-Stage Charging: A multi-stage algorithm is designed to enhance battery’s performance and increase its lifespan.
• Upgraded Protection: PV/battery reverse polarity, over-charge/discharge, over load/temperature, back feeding (night) and short circuit protection are embedded.
• Durable Construction: Sturdy ABS housing is impact and shock resistant, and the cover protects terminals against corrosion and shorting.
• Rapid Heat Dissipation: With MOSFET to allow larger currents, the upgraded aluminium heat sinks are designed to rapidly dissipate heat for smoother operation.
• Highly Compatible: This solar MPPT controller fits a variety of lead acid deep cycle batteries, including flooded, AGM and GEL, and LiFePO4 batteries.
• User Friendly Design: This MPPT controller features indicators for real-time status of solar panel, load & battery, and USB output for charging mobile devices.

• Ultra Durability: ABS housing enables the dust-proof controller to resist fire, zinc alloy terminals enhances structural strength with better conduction performance.
• 3-Stage Charging: A PWM 3-stage algorithm, bulk, absorption and 100% float charge, is designed to enhance efficiency and ensure battery lifespan.
• Super Compatibility: It is compatible with lead acid battery(flooded, GEL and AGM) and lithium battery ( Li(LiCoMn)O2 and LiFePO4).
• Electronic Protection: Low/over voltage, short circuit, overcharge/ over discharge, overcurrent, overload and reverse polarity protection are integrated.
• Dual Solar Connection: This solar controller is designed to be connected to 2 solar panels simultaneously to increase charging efficiency.
• Programmable Voltage: The voltage of this PWM solar controller is programmable to ensure the safety and longevity of different batteries.
• Strengthened Boards: Our PCB and backplane boards are 1.2mm and 1mm in thickness which are fracture proof VS 0.8mm and 0.6mm offered by competitors.
• Simple Operation: LCD display provides a real-time view, 2 buttons for easy setting and 2 USB ports power your lamps or work as a phone charger.
• Temperature Compensation: This mechanism is designed to automatically adjust charge & discharge voltage to enhance battery’s lifespan.

• Ultra Tough Housing: The ATEM POWER Anderson plug is made of ultra tough polycarbonate housing to withstand toughest conditions.
• Versatile Functionality: This plug is ideal for batteries, backup power, automotive/caravan power, telecommunications and data transmission.
• Premium Terminal & Contact: Low resistance silver plated contacts and copper terminals capable of handling high currents with minimal loss.
• All Weather Dependability: This Anderson plug is dust and waterproof so you can go anywhere reliably.
• RoHS Compliant: RoHS compliance serves as a guarantee that there is no restricted chemical substances in the plug.
• Genderless Design: Genderless design allows you to quickly create custom, highly efficient connections for any DC and solar setup.

• Lithium Battery Activation: Revitalize your sleeping lithium battery with a simple switch to "lithium mode," connecting it to the solar panel for a magical revival.
• Highly Efficient: Experience unparalleled efficiency as our MPPT solar regulator extracts 98% of power from your panel, surpassing PWM methods by 23%.
• Accurate Tracking: Achieve optimal power point charging, even in cloudy conditions, with remarkable 99% tracking efficiency from our MPPT solar controller.
• Automatic Voltage Detection: Our MPPT solar charge controller identifies your system's voltage upon connection, supporting both 12V and 24V systems with ease.
• Intelligent Protection: It prioritizes safety with complete protection against reverse polarity, overcurrent, over-temperature, under voltage, overvoltage, and short circuits.
• Genuine 3-Stage Charging: Our MPPT solar controller maximizes energy flow through boost, absorption, and float stages, ensuring the most efficient performance.
• Easy Setup & Quick Charging: Our MPPT solar regulator simplifies setup with screw terminals and enables quick charging through type A and type C outlets.
• User-Friendly Interface: Stay informed with multiple LED indicators displaying vital system information and a convenient button for selecting your battery type.
• Multi Chemistry: Embrace compatibility with a range of batteries, including 12V or 24V lead acid, AGM, Gel, calcium, and LiFePO4.
• Built TOUGH: The strengthened ABS housing offers impact & shock resistance, while the aluminium alloy chassis with integrated heat sinks ensures efficient cooling.

Upgrade your camping power effortlessly with the Atem Power 12V Cigarette Socket to Anderson Style Plug Cable, elevating your off-grid electrical setup for accessing power wherever needed. The 12AWG cable, coupled with the pre-crimped Anderson style connector, reliably supports all in-car small appliances up to 250W. Use it to charge your fridge, oven, camera, and GPS and enjoy USB charging by simply connecting to your car's USB charger. Seamlessly pair it with the matching 12V Cigarette Plug Adaptor to Anderson Style Plug Cable or other Atem Power quick-connect gear for a tailored setup and unmatched versatility.

Features

• Amplify 12V Setup: With a compact 30cm length, the 12V cigarette socket to Anderson style plug cable easily extends your off-grid camping system.
• Wide Application: The cable can not only be used to charge your fridge, oven, camera, and GPS but also enables USB charging using your car’s USB charger.
• Flexibility Through Combining: Pair it with 12V cig plug adaptor to Anderson style plug cable or other quick-connect gear - an ideal addition for more flexibility!
• Enhanced Safety: Explore the reliability of 12AWG cable with pre-crimped Anderson style connector, supporting all in-car small appliances up to 250W.

• Amplify 12V Setup: With a compact 30cm length, the cigarette plug adaptor to Anderson style plug cable extends your off-grid camping system.
• Cig to Anderson: Perfect for adding an Anderson to cig socket, like running a 12V oven or fridge without the need to hard-wire a quick-connect plug into your vehicle.
• Flexibility Through Combining: Pair it with 12V Cigarette Socket to Anderson Style Plug Cable or other quick-connect gear - an ideal addition for more flexibility!
• Enhanced Safety: The 12AWG cable is equipped with a built-in 8A fuse and coupled with a pre-crimped Anderson connector for efficient and safe connections.

Whether you're on the road in an RV or relaxing in a shaded woodland cabin, our MPPT controller utilizes advanced MPPT technology to optimize solar power capture for efficient battery charging, boasting 99.5% tracking efficiency. Its built-in temperature sensor and Bluetooth module simplify setup and monitoring. Our MPPT solar charge controller provides exceptional functionality and ease of use for both 12V and 24V systems. It seamlessly adapts to various battery types, supporting lithium-ion, flooded, AGM, gel, and calcium batteries. Our MPPT lithium solar charge controller ensures comprehensive protection against multiple potential issues, safeguarding your system and battery. Our MPPT solar regulator includes a clear LCD screen that displays essential information, allowing for easy monitoring of your solar setup. The built-in Bluetooth module allows for convenient remote monitoring, enabling real-time access to system data and parameter adjustment from anywhere.
Features

• Efficient MPPT Technology: Our MPPT solar charge controller achieves exceptional tracking efficiency of 99.5% and its peak conversion efficiency reaches 98%.
• Accurate Charging: An integrated temperature sensor measures ambient temperature in real-time to ensure precise temperature compensation during charging.
• Remote Monitoring: With built-in Bluetooth module, effortlessly monitor your system, access real-time data, and adjust parameters directly from your smartphone.
• Highly Compatible: Our MPPT controller supports diverse battery types including lithium-ion and lead-acid variants such as flooded, AGM, gel, and calcium batteries.
• Multi-Stage Charging: Our MPPT charge controller features multi-stage charging for various battery types, including automatic activation for lithium batteries.
• Complete Protection: Our MPPT controller offers full protection against reverse polarity, over-charge/discharge, over load/temperature, short circuit & reverse current.
• Automatic Voltage Detection: Our MPPT lithium solar charge controller seamlessly detects 12V / 24V DC system voltages, offering effortless and user-friendly operation.
• Versatile Load Control: Connect DC appliances to the load terminals and configure various load working modes to suit your specific needs.
• Clear LCD Display: Our MPPT solar controller features an easy-to-read LCD screen that enables easy viewing of charge status, progress, and discharge details for your setup.
• Enhanced Heat Dissipation: The dense aluminium heat sinks effectively dissipate heat, ensuring maximum charging efficiency and the safety of components.

San Hima 160W Solar Blanket – Compact Power, Built for the Outdoors

They might all look alike—lightweight, foldable, and easy to carry—but the San Hima 160W Solar Blanket is built different. With high-performance HPBC (Hybrid Passivated Back Contact) solar cell technology, it reaches an impressive 24% conversion efficiency, giving you more usable energy from every bit of sunlight.

By moving the metal contacts to the back of each cell, HPBC tech eliminates shading, absorbs more light, and performs reliably—even in the harsh heat of the Aussie outback. Topped with a rugged ETFE coating, this blanket is self-cleaning, corrosion-resistant, and designed to handle the elements.

The durable anti-crack film offers strength and flexibility for real-world use—no need to stress about bumps, heat, or wear. Pair that with the included MPPT controller, and you've got efficient charging for multiple battery types including Lead Acid, AGM, GEL, Calcium, and LiFePO4, plus USB charging ports for your devices.

Whether you're camping, hitting the road in your caravan, or setting up a remote workstation, this solar blanket is compact, powerful, and ready to keep your gear running wherever you go.

Top Features

⚡ HPBC Technology
Advanced solar cells with rear-mounted contacts for minimal shading and maximum light absorption—delivering 24% efficiency.

🧼 Self-Cleaning ETFE Coating
Non-stick, corrosion-resistant, and high-transmission—this coating keeps your panel performing longer in any environment.

🛠️ Flexible & Crack-Resistant
Engineered to withstand the rigours of outdoor life with superior tensile strength and impact resistance.

🔋 MPPT Charging Made Simple
Charges 12V/24V systems and supports a wide range of battery types. Also activates sleeping LiFePO4 batteries.

🎒 Lightweight & Compact
At just 5.1kg, this 160W blanket folds down to a handy 403 x 417 x 60mm carry bag—ready to toss in your Ute, 4WD, or camper.

🛡️ Built-in Safety Protection
Stay protected with safeguards against reverse polarity, overcurrent, overvoltage, under voltage, and short circuits.

🔌 Plug-and-Play Setup
Includes Anderson-style connectors for fast, secure, and reliable cable connections.

📱 On-the-Go Device Charging
Keep your devices powered up via USB Type A and Type C ports built into the MPPT controller.

🏕️ Designed for Adventure
Features a strong carry handle, front storage pocket, and hanging loops—ready for wherever your journey takes you.

⚠️ Note: Please avoid using a P.O. Box for delivery.

Specifications

Solar Blanket

• Open Dimensions: 1,930 x 795 x 5 mm

• Folded Dimensions: 403 x 417 x 60 mm

• Cell Type: HPBC

• Cell Coating: ETFE

• Backing: Nylon

• Conversion Efficiency: 24%

• Max Power (PM): 160W

• Open Circuit Voltage (VOC): 22.5V

• Short Circuit Current (ISC): 9.9A

• Max Power Voltage (VMP): 17.3V

• Max Power Current (IMP): 9.2A

• Max System Voltage: 36V

• Power Tolerance: ±5%

• Operating Temp: -40℃ to 85℃

• Connector: Anderson-style Plug

• Certifications: CE

• Weight: 5.1kg

MPPT Controller

• Battery Voltage Range: 12V / 24V

• Max PV Input Voltage: 50V

• Rated Charge/Discharge Current: 20A

• Max PV Input Power: 500W

• Discharge Voltage Drop: ≤0.3V

• Self Consumption: ≤8mA

• No Load Current: ＜10mA

• Standby Draw: ≤4mA

• USB Output: Type A + Type C (5V / 2.4A)

• Operating Temp: -20℃ to 50℃

• Storage Temp: -30℃ to 70℃

• Humidity: ≤90%

• Package Size: 45.6cm x 44.7cm x 11.7cm

• Package Weight: 5.5kg

What’s Included

• 1 x San Hima 160W Solar Blanket

• 1 x 20A MPPT Solar Charge Controller (with Anderson-style plugs)

• 1 x 4.5m Extension Cable (Anderson-style)

• 1 x Alligator Clip Cable (Anderson-style plug)

• 1 x User Manual

Warranty

✅ 2-Year Warranty – Long-lasting reliability, backed by Aussie support.

San Hima 260W Solar Blanket – Small Size, Serious Power

Solar blankets might look the same at a glance—lightweight and compact—but the San Hima 260W Solar Blanket sets itself apart with advanced Hybrid Passivated Back Contact (HPBC) technology. With a remarkable 24% conversion efficiency, you can soak up more of the sun’s energy and keep your gear charged—wherever your adventure takes you.

Thanks to back-mounted metal contacts, our HPBC cells eliminate shading and boost light absorption, giving you more reliable performance even in harsh, hot Aussie conditions. Combined with a high-performance ETFE coating, this blanket resists corrosion and stains while enhancing light transmission with a self-cleaning surface.

Made for the outdoors, the anti-crack flexible film delivers outstanding durability and stress resistance. Whether you're camping, caravanning, or going completely off-grid, this blanket is built tough to go the distance.

The included 20A MPPT controller is designed to efficiently charge a range of battery types including Lead Acid, AGM, GEL, Calcium, and LiFePO4—even waking up sleeping LiFePO4 batteries. And with USB Type A and Type C ports, you can keep your devices powered up on the go.

Key Features

☀️ HPBC Cell Innovation
By moving metal contacts to the back, HPBC cells eliminate shading and achieve 24% energy conversion, maximizing every ray of sunshine.

🧼 ETFE Coating
Tough and self-cleaning, the ETFE layer resists corrosion and grime while improving light capture for greater output.

🛠️ Flexible, Crack-Resistant Film
Built to handle life on the road, the film offers excellent tensile strength and thermal stability—no cell breakage, even under stress.

🔋 Smart MPPT Controller
Optimised charging for 12V/24V systems and multiple battery types, including the ability to activate dormant LiFePO4 batteries.

🎒 Lightweight & Travel-Ready
At just 7.3kg, this 260W solar blanket folds down to 490x430x75mm, fitting easily into its included carry bag with handle and front pocket.

⚡ Built-In Protection
Enjoy peace of mind with safety features like reverse polarity, overcurrent, overvoltage, undervoltage, and short circuit protection.

🔌 Plug-and-Play
Anderson-style connectors on all cables ensure secure, reliable, and quick connections every time.

📱 Charge Devices Anywhere
Stay connected with USB Type A and Type C ports to charge phones, tablets, and other devices wherever you are.

🧳 Adventure-Ready Design
Includes hanging loops, front storage pocket, and a tough carry handle—designed for the traveller who needs power without the bulk.

⚠️ Important: Please avoid using a P.O. Box as your delivery address.

Specifications

Solar Blanket

• Open Dimensions: 2,425 x 965 x 5 mm

• Closed Dimensions: 490 x 430 x 75 mm

• Cell Type: HPBC (Hybrid Passivated Back Contact)

• Coating: ETFE

• Backing: Nylon

• Conversion Efficiency: 24%

• Max Power: 260W

• Open Circuit Voltage (VOC): 28.2V

• Short Circuit Current (ISC): 13.2A

• Max Power Voltage (VMP): 21.1V

• Max Power Current (IMP): 12.3A

• Max System Voltage: 42V

• Power Tolerance: ±5%

• Operating Temp: -40℃ ~ 85℃

• Connector Type: Anderson-style Plug

• Certifications: CE

• Weight: 7.9kg

MPPT Controller

• Battery Voltage: 12V/24V

• Max PV Input Voltage: 50V

• Rated Charge/Discharge Current: 20A

• Max PV Input Power: 500W

• USB Output: Type A + Type C, 5V/2.4A

• Self Consumption: ≤8mA

• No Load Current: ＜10mA

• Standby Current Draw: ≤4mA

• Operating Temp: -20℃ ~ 50℃

• Storage Temp: -30℃ ~ 70℃

• Humidity: ≤90%

• Package Size: 45.6cm x 44.7cm x 11.7cm

• Package Weight: 7.9kg

What’s in the Box?

• 1 x San Hima 260W Solar Blanket

• 1 x 20A MPPT Solar Charge Controller (with Anderson-style plugs)

• 1 x 4.5m Extension Cable (Anderson-style plugs)

• 1 x Cable with Alligator Clips + Anderson-style Plug

• 1 x User Manual

Warranty

✅ 2-Year Warranty – Built to last and backed by our trusted guarantee.

Not All Solar Blankets Are Created Equal…

They might all look similar—lightweight, foldable, and easy to carry—but the San Hima 360W Solar Blanket is in a league of its own. Featuring cutting-edge Hybrid Passivated Back Contact (HPBC) cell technology, it delivers an impressive 24% conversion efficiency, so you can make the most of every ray of sunshine while you're off the grid.

Unlike traditional solar cells, our HPBC design moves the metal contacts to the back, eliminating shading and capturing more sunlight—especially in hot Aussie conditions. Backed with a tough ETFE coating, this solar blanket resists corrosion, repels grime, and enhances light transmission with a self-cleaning, non-stick surface.

From rough terrain to blazing heat, the anti-crack flexible film gives you peace of mind with high tensile strength and durability. The included 20A MPPT controller smartly charges a variety of battery types—Lead Acid, AGM, GEL, Calcium, and LiFePO4—and even kicks LiFePO4 batteries out of sleep mode. Plus, built-in USB ports (Type A & C) keep your phones, tablets, and gadgets juiced up on the go.

Whether you’re heading into the bush, the outback, or just going off-grid for a few days, this solar blanket is built for adventure.

Key Features

⚡ HPBC Technology
Back-mounted contacts eliminate shading and boost sunlight capture, achieving up to 24% efficiency for powerful off-grid energy.

☀️ ETFE Coating
Durable and non-stick, this surface resists stains and corrosion while maximizing light transmission.

🛡️ Crack-Resistant Design
Flexible film construction ensures superior strength, thermal stability, and resistance to impact—no broken cells here.

🔋 MPPT Controller
Smart charging for multiple battery types (12V/24V), plus safe activation of sleeping LiFePO4 batteries.

📦 Lightweight & Portable
Weighs just 8.7kg and folds down to a compact 478x430x95mm, fitting neatly into its own carry bag.

🔌 Built-In Protection
Stay safe with protection against reverse polarity, overcurrent, undervoltage, overvoltage, and short circuits.

🔧 Anderson-Style Plugs
Secure, plug-and-play cable connections for hassle-free setup.

📱 USB Charging On the Go
Charge your devices anywhere with Type A and Type C USB ports on the controller.

👜 Ready for the Road
Comes with a sturdy handle, hanging loops, and a front pocket for your accessories.

⚠️ Note: Please avoid using a P.O. Box as your mailing address.

Specifications

Solar Blanket

• Open Dimensions: 2,860 x 960 x 5 mm

• Closed Dimensions: 478 x 430 x 95 mm

• Cell Type: HPBC

• Cell Coating: ETFE

• Backing: Nylon

• Conversion Efficiency: 24%

• Max Power: 360W

• VOC: 28.5V | ISC: 17.9A

• VMP: 21.3V | IMP: 16.9A

• Max System Voltage: 42V

• Tolerance: ±5%

• Operating Temp: -40℃ to 85℃

• Connector: Anderson-style

• Certifications: CE

• Weight: 8.7kg

MPPT Controller

• Battery Voltage: 12V/24V

• Max PV Input Voltage: 50V

• Rated Charge/Discharge Current: 20A

• Max PV Input Power: 500W

• USB Output: Type A + Type C (5V/2.4A)

• Self Consumption: ≤8mA

• Operating Temp: -20℃ to 50℃

• Storage Temp: -30℃ to 70℃

• Humidity: ≤90%

• Package Size: 51cm x 46.8cm x 13.5cm

• Package Weight: 9.4kg

What’s in the Box?

• 1 x San Hima 360W Solar Blanket

• 1 x 20A MPPT Solar Charge Controller (Anderson Plugs)

• 1 x 4.5m Extension Cable (Anderson Plugs)

• 1 x Cable with Alligator Clips & Anderson Plug

• 1 x User Manual

Warranty: 2-Year Warranty for peace of mind.

Renogy PRO 12V 400W Lightweight Portable Solar Suitcase – Maximum Power, Minimal Bulk

Power your off-grid adventures with the Renogy PRO 12V 400W Lightweight Portable Solar Suitcase, the ultimate blend of high output and portability. Whether you're camping, caravanning, or living off-grid, this powerhouse is designed to keep your gear charged without weighing you down.

💪 High-Performance Solar Power

• Massive 400W Output: Ideal for charging 12V batteries and powering your off-grid setup.
• Efficient Power Delivery:
  • Open Circuit Voltage: 47.2V
  • Optimum Operating Voltage: 40V
  • Optimum Operating Current: 10A
• High Current Capability: Short circuit current of 11A, with a 15A maximum fuse rating for reliable performance.

🌞 Built for Harsh Outdoor Conditions

• Extreme Temperature Resilience: Operates from -40°C to 85°C—from frosty mornings to blistering heat.
• Built Tough: Designed to handle rugged environments and frequent travel.
• Weather Resistant: Durable construction ensures protection against the elements.

🧳 Lightweight, Foldable, and Portable

• Ultra-Compact Design:
  • Folded Dimensions: 708 × 855 × 80 mm (27.9 × 33.7 × 3.2 in)—easy to store and carry.
  • Unfolded Dimensions: 2838 × 855 × 20 mm (111.8 × 33.7 × 0.8 in)—expands to capture maximum sunlight.
• Lightweight Build: Weighs only 13.7 kg (30.2 lbs), making it easy to transport to your campsite or remote location.

⚡ Powerful & Safe

• Maximum System Voltage: 600VDC, compatible with larger solar systems.
• Maximum Series Fuse Rating: 15A for safe and efficient operation.

✅ Ideal for:

• Camping, RVs, 4WD adventures, and tiny homes
• Off-grid solar power systems
• Charging 12V battery banks and portable power stations

🌞 Unfold. Connect. Power Your Adventure with Renogy PRO. 🌞

Renogy CORE 12V 100W Rigid Solar Panel – Reliable Power for Your Off-Grid Adventures

The Renogy CORE 12V 100W Rigid Solar Panel is built for reliable, high-efficiency solar power—perfect for RVs, caravans, boats, and off-grid setups. With rugged construction and powerful output, this panel delivers long-lasting performance wherever your adventures take you.

💪 High-Efficiency Performance

• 100W Maximum Power: Ideal for charging 12V batteries and powering essential devices.
• 20% Module Efficiency: Converts more sunlight into energy for faster charging.
• Optimal Performance:
  • Open Circuit Voltage: 22.79V
  • Optimum Operating Voltage: 19.97V
  • Optimum Operating Current: 5.01A

⚡ Durable & Safe for Long-Term Use

• Maximum System Voltage: 600VDC, compatible with larger solar arrays.
• Maximum Series Fuse Rating: 15A for safe, efficient operation.
• Extreme Temperature Range: Operates from -40°C to 90°C (-40°F to 194°F), built to handle harsh environments.

🛡️ Built Tough for All Conditions

• Rigid Aluminum Frame: Corrosion-resistant for long-term outdoor use.
• Weather Resistant: Engineered to withstand wind, rain, and snow.
• Durable Glass Coating: Protects solar cells from impact and wear.

🧳 Compact & Lightweight Design

• Dimensions: 865 × 578 × 30 mm (34.1 × 22.8 × 1.2 in)
• Lightweight: Only 5.9 kg (13 lbs) for easy mounting and installation.

✅ Perfect for:

• RVs, caravans, boats, and 4WD setups
• Off-grid solar power systems
• Charging 12V battery banks and solar generators

🌞 Power Your Journey. Explore Without Limits. Built to Last with Renogy CORE. 🌞

Renogy REGO 12V 150W Flexible and Lightweight Thin-Film Solar Panel – Bend the Sun to Your Will

The Renogy REGO 12V 150W Flexible and Lightweight Thin-Film Solar Panel is the perfect solution for portable, off-grid power. Built for ultimate flexibility and convenience, it easily conforms to curved surfaces, making it ideal for boats, RVs, caravans, and even tents.

💪 Powerful Performance in a Flexible Form

• 150W Max Power Output: Reliable energy for charging 12V batteries and power stations.
• High Efficiency:
  • Optimum Operating Voltage (Vmp): 18.66V
  • Optimum Operating Current (Imp): 8.04A
  • Short Circuit Current (Isc): 9.34A
  • Open Circuit Voltage (Voc): 23.75V
• Maximum System Voltage: 600VDC for large-scale connections.
• Maximum Series Fuse Rating: 15A for safe, efficient performance.

🧳 Ultra-Flexible & Lightweight Design

• Bends to Fit Curves: Thin-film technology allows the panel to flex and contour over uneven surfaces.
• Ultra-Lightweight: Weighing only 2.1 kg (4.62 lbs) for easy installation.
• Thin Profile: Only 1.5 mm (0.06 in) thick—sleek and low-profile.
• Large Coverage Area: 1658 × 646 mm (65.3 × 25.4 in) for maximum sun capture.

🛡️ Built for All-Weather Durability

• Wide Temperature Range: Operates from -40°C to 85°C (-40°F to 185°F)—handles extreme heat and cold.
• Weather Resistant: Thin-film design stands up to wind, rain, and saltwater environments—perfect for marine use.

✅ Ideal for:

• RVs, campers, and 4WD vehicles
• Boats, yachts, and marine applications
• Off-grid cabins and tiny homes
• Portable solar power stations

💯 Why Choose Renogy REGO 150W Flexible Solar Panel?

• 🌞 Flexible Design: Perfect for curved or uneven surfaces
• ⚡ High Performance: Reliable power output
• 🧳 Lightweight: Easy to transport and install
• 💪 Durable: Built for the toughest conditions

🌞 Bend. Charge. Explore. With Renogy REGO. 🌞

Renogy PRO 220W Compact Suitcase Portable Solar Panel – Power Anywhere, Anytime

The Renogy PRO 220W Compact Suitcase Portable Solar Panel delivers reliable, high-efficiency solar power in a portable, foldable design. Perfect for campers, RV owners, and off-grid adventurers, this compact powerhouse is designed for quick setup and maximum energy capture.

💪 High Performance Solar Power

• 220W Max Power Output: Ideal for charging 12V battery systems and solar generators.
• High Efficiency:
  • 22.7% Cell Efficiency for optimal solar conversion.
  • 17.3% Module Efficiency for maximum power generation.
• Optimized Energy Performance:
  • Open Circuit Voltage (Voc): 23.6V
  • Optimum Operating Voltage (Vmp): 20.0V
  • Optimum Operating Current (Imp): 11A
  • Short Circuit Current (Isc): 12.1A

🧳 Compact, Foldable & Travel-Friendly

• Folded Dimensions: 460 × 690 × 80 mm (18.11 × 27.17 × 3.15 in) for easy carrying and storage.
• Expanded Dimensions (with handle): 1843 × 730 × 20 mm (72.56 × 28.74 × 0.79 in)
• Expanded Dimensions (without handle): 1843 × 690 × 20 mm (72.56 × 27.17 × 0.79 in)
• Lightweight Design: Weighs only 7.2 kg (15.87 lbs)—light enough for solo travelers.
• Convenient Handle: Makes transportation easy and comfortable.

🛡️ Built for All Weather Conditions

• Wide Operating Temperature Range: Functions from -40°C to 85°C (-40°F to 185°F), perfect for any climate.
• Durable Construction: Designed for rugged outdoor use.
• Water-Resistant and Dustproof: Built to handle the harsh Aussie outback or coastal environments.

⚡ Safe & Compatible with Your System

• Maximum System Voltage: 600VDC for compatibility with larger solar arrays.
• Maximum Series Fuse Rating: 15A for safe operation.
• Universal Solar Connectors: Plug-and-play with most solar generators and battery banks.

✅ Perfect for:

• Camping, 4WD adventures, and off-grid living
• RVs, caravans, and camper trailers
• Charging 12V battery banks and power stations

💯 Why Choose the Renogy PRO 220W Compact Suitcase Solar Panel?

• 🌞 Compact and Foldable: Easy to carry, store, and set up
• ⚡ High Efficiency: Maximum power output with 22.7% cell efficiency
• 💪 Rugged and Durable: Built for extreme conditions
• ✅ Travel Ready: Lightweight with a comfortable handle

🌞 Unfold. Connect. Power Your Adventure with Renogy PRO. 🌞

Renogy CORE 100W Portable Solar Panel – Compact, Powerful, and Ready for Adventure

The Renogy CORE 100W Portable Solar Panel is a lightweight, high-efficiency solution for off-grid power on the go. Built to handle the rugged outdoors, this compact panel is perfect for camping, 4WD adventures, RV trips, and emergency backup power.

💪 Powerful & Efficient Solar Performance

• 100W Maximum Output: Reliable energy for charging batteries, power stations, and more.
• High Cell Efficiency (>23.5%): Converts more sunlight into usable power for faster charging.
• Optimized Performance:
  • Open Circuit Voltage (Voc): 23.40V
  • Optimum Operating Voltage (Vmp): 20.16V
  • Optimum Operating Current (Imp): 4.96A
  • Short Circuit Current (Isc): 5.26A

🧳 Compact, Foldable, and Lightweight

• Folds for Easy Storage:
  • Folded Size: 616 × 536 × 45 mm (24.3 × 21.1 × 1.8 in)
  • Unfolded Size: 1233 × 536 × 3 mm (48.5 × 21.1 × 0.1 in)
• Lightweight: Only 4.3 kg (9.5 lbs)—easy to carry anywhere.

🛡️ Durable and Built for the Outdoors

• Weather Resistant (IP65): Built to withstand rain, dust, and tough outdoor conditions.
• Wide Temperature Range: Operates from -10°C to +65°C (14°F to 149°F) for all-season performance.
• Rugged Construction: Designed to handle the bumps and scrapes of off-grid adventures.

✅ Perfect for:

• Camping, RVs, 4WD adventures, and road trips
• Solar generators and portable power stations
• Off-grid battery charging
• Emergency backup power

💯 Why Choose the Renogy CORE 100W Portable Solar Panel?

• 🌞 Compact and Foldable: Easy to pack and transport
• ⚡ High Efficiency: More power with >23.5% cell efficiency
• 🛡️ Durable: Weather-resistant for outdoor adventures
• ✅ Lightweight: Only 4.3 kg for easy carrying

🌞 Charge Anywhere. Explore Everywhere. With Renogy CORE. 🌞

⚡ Renogy CORE Wanderer 30A 12V/24V PWM Negative Ground Solar Charge Controller – Smart, Reliable, and Built for Lithium Batteries

The Renogy CORE Wanderer 30A 12V/24V PWM Solar Charge Controller is a robust and efficient solution for managing your solar power system. Engineered with smart 4-stage PWM charging, full system protection, and real-time monitoring capabilities, this controller is perfect for 12V and 24V solar systems, including LiFePO4 (lithium) batteries. Whether you’re powering an RV, camper, boat, or off-grid cabin, the Wanderer ensures your batteries are charged efficiently and safely.

💪 Smart 4-Stage Charging for Maximum Performance:

✅ Optimized for 12V Batteries: Compatible with AGM, Flooded, Gel, and Lithium (LiFePO4) batteries.
✅ 4-Stage Smart Charging:

• Bulk: Rapid charging to replenish energy quickly.
• Boost: Maintains constant voltage to charge the battery efficiently.
• Float: Keeps the battery topped up without overcharging.
• Equalization (for non-lithium batteries): Balances cell voltage for longer battery life.
  ✅ 30A Rated Charge Current: Handles up to 400W of solar input at 12V.

🛡️ Full System Protection – Safe and Reliable:

✅ Built-in Safety Features: Protects your system from:

• Overcharging and Over-discharging
• Reverse Polarity
• Short Circuits
• Overvoltage Protection (High Voltage Disconnect at 16V)
  ✅ Temperature Compensation: Adjusts charging based on temperature to extend battery life (-3mV/°C/2V).

📡 Real-Time Monitoring and Connectivity:

✅ RS232 Port: Connects to Renogy’s Bluetooth Module (sold separately) for real-time performance monitoring via the Renogy DC Home App.
✅ LED Indicators: Displays charging status and system alerts at a glance.

🌞 Highly Efficient with Low Self-Consumption:

✅ Extremely Low Self-Consumption: Less than 10mA, conserving more power for your batteries.
✅ Maximum Solar Input:

• PV Input Power: Up to 400W at 12V
• PV Input Voltage: Up to 25 VDC

❄️ Built for All Conditions:

✅ Operating Temperature Range: From -20°F to 113°F (-29°C to 45°C) for all-weather performance.
✅ Storage Temperature: Safely stored between -31°F to 176°F (-35°C to 80°C).

📏 Compact, Durable, and Easy to Install:

✅ Compact Size: 6.45” x 4.31” x 1.76” (163.83 x 109.62 x 44.7mm)—small enough to fit into tight spaces.
✅ Lightweight: Weighs only 0.65 lbs (0.29 kg).
✅ Durable Housing: IP20 Enclosure for indoor installations.
✅ Wide Cable Support: Accepts wire sizes up to 8AWG.

🛡️ Certified Safe and Reliable:

✅ Certifications: CE, RoHS certified for safety and environmental standards.
✅ Negative Ground Design: Suitable for use in RVs, boats, and off-grid systems.

🔥 Smart Charging. Maximum Protection. Complete Control. The Renogy CORE Wanderer 30A PWM Solar Charge Controller is your trusted partner for efficiently managing your solar power system while protecting your batteries for the long haul.

💪 Get yours today and power your adventures with confidence! ☀️🔋🏕️

⚡ Renogy CORE Rover 12V/24V 20A MPPT Solar Charge Controller – Maximum Efficiency, Smart Charging

The Renogy CORE Rover 20A MPPT Solar Charge Controller is a powerful and intelligent solution for managing your solar power system. Designed with MPPT (Maximum Power Point Tracking) technology, 4-stage charging, and remote monitoring capabilities, it offers superior performance and protection for your solar investment. Perfect for off-grid solar systems, RVs, boats, and cabins, this charge controller optimizes energy harvest and ensures your batteries are charged safely and efficiently.

💪 Advanced MPPT Technology – Maximum Power Harvesting:

✅ 20A Rated Charge Current: Handles up to 260W at 12V and 520W at 24V.
✅ High PV Input Voltage: Accepts up to 95VDC—compatible with various solar panel configurations.
✅ Auto 12V/24V Detection: Automatically adjusts system voltage for non-lithium batteries.
✅ Efficient Tracking & Conversion: Improves charging efficiency by up to 99%.

⚙️ Smart 4-Stage Charging for Battery Protection:

✅ 4-Stage Smart Charging:

• Bulk: Rapid initial charge.
• Boost: Maintains a constant voltage.
• Float: Keeps battery topped without overcharging.
• Equalization (for non-lithium): Balances battery cells for longer life.
  ✅ Lithium Battery Support: Automatically charges over-discharged lithium batteries.
  ✅ Wide Battery Compatibility: Supports AGM, Gel, Flooded, and Lithium (LiFePO4) batteries.

📡 Remote Monitoring & Load Control Options:

✅ RS485 Communication Port: Connect to Renogy’s BT-2 Bluetooth Module or Renogy ONE for real-time monitoring via the Renogy DC Home App (sold separately).
✅ Load Control Functionality: Programmable load control options for lighting or power management.

🛡️ Built-In Safety Protections for Peace of Mind:

✅ Advanced Electronic Protections: Guards against:

• Overcharging and Over-discharging
• Short Circuits
• Overloads
  ✅ Over-Discharge Recovery: Capable of recharging deeply discharged lithium batteries.
  ✅ Temperature Compensation: Adjusts charging according to temperature (-3mV/°C/2V), extending battery life.

❄️ Durable and Reliable in All Conditions:

✅ Operating Temperature Range: From -35°C to 45°C (-31°F to 113°F)—built for harsh environments.
✅ Storage Temperature Range: From -35°C to 75°C (-31°F to 167°F).
✅ Humidity Tolerance: Up to 90% (no condensation).
✅ IP32 Protection Level: Resists dust and water splashes for indoor installations.

📏 Compact, Sturdy, and Easy to Install:

✅ Compact Dimensions: 210 x 151 x 68 mm (8.27 x 5.95 x 2.69 in)—fits easily in small spaces.
✅ Lightweight: Weighs only 3.1 lbs (1.4 kg).
✅ Wide Terminal Support: Accepts cables up to 8 AWG (10mm²).

🛡️ Certified Safe and Backed by Warranty:

✅ Certifications: CE, FCC Class B Part 15 Compliant for safety and performance.
✅ Warranty: 3-Year Material and Workmanship Warranty from Renogy.

🔥 Efficient. Smart. Reliable. The Renogy CORE Rover 20A MPPT Solar Charge Controller is your go-to solution for maximizing your solar energy harvest and keeping your batteries fully charged and protected.

💪 Get yours today and power your solar system with confidence! ☀️🔋🏕️

⚡ Renogy CORE Rover 12V/24V/36V/48V 60A MPPT Solar Charge Controller – Maximize Your Solar Efficiency

The Renogy CORE Rover 60A MPPT Solar Charge Controller is a powerful and reliable solution for managing your solar power system. Engineered with advanced MPPT (Maximum Power Point Tracking) technology, it achieves up to 99% tracking efficiency and 98% peak conversion efficiency, ensuring you get the most out of your solar panels. Perfect for large off-grid systems, RVs, boats, and solar cabins, this charge controller is built to deliver superior performance and safety.

💪 Advanced MPPT Technology for Maximum Performance:

✅ 60A Rated Charge Current: Supports high-capacity solar systems.
✅ Auto System Voltage Recognition: Detects 12V, 24V, 36V, or 48V systems automatically (for non-lithium batteries).
✅ High PV Input Voltage: Accepts up to 140VDC from solar panels—perfect for series-connected solar arrays.
✅ High Power Handling:

• 800W for 12V Systems
• 1600W for 24V Systems
• 2400W for 36V Systems
• 3200W for 48V Systems
  ✅ Tracking and Conversion Efficiency:
• MPPT Tracking Efficiency: Up to 99%
• Peak Conversion Efficiency: Up to 98%

⚙️ Smart 4-Stage Charging for Battery Protection:

✅ 4-Stage Charging:

• Bulk: Rapid recharge with maximum current.
• Boost: Maintains voltage to ensure a full charge.
• Float: Keeps the battery topped without overcharging.
• Equalization (for non-lithium): Balances battery cells and extends lifespan.
  ✅ Wide Battery Compatibility: Supports AGM, Flooded, Gel, and Lithium (LiFePO4) batteries.

📡 Bluetooth Monitoring & Remote Control Ready:

✅ RS485 Communication Port: Connects to the Renogy BT-1 Bluetooth Module (sold separately) for real-time monitoring via the Renogy DC Home App.
✅ Easy-to-Read LED Indicators: Displays charging status and system alerts at a glance.

🛡️ Built-In Safety Protections for Peace of Mind:

✅ Comprehensive Safety Protections:

• Overcharging Protection
• Over-discharging Protection
• Overload Protection
• Short-Circuit Protection
  ✅ Temperature Compensation: Automatically adjusts charging based on temperature for longer battery life (-3mV/°C/2V).

❄️ Durable and Reliable in All Conditions:

✅ Wide Operating Temperature: From -31°F to 113°F (-35°C to 45°C) for reliable performance in harsh environments.
✅ IP32 Rated Enclosure: Protected against dust and water splashes.
✅ Low Self-Consumption: Uses only 0.7W to 1.2W, preserving more power for your batteries.

📏 Compact, Sturdy, and Easy to Install:

✅ Dimensions: 11.22” x 8.07” x 4.00” (285 x 205 x 102mm)
✅ Weight: 7.9 lbs (3.58 kg)
✅ Wide Terminal Support: Accepts cables up to 25mm² (4 AWG) for secure connections.

🛡️ Certified Safe and Backed by Warranty:

✅ Certifications: CE, RoHS certified for safety and environmental standards.
✅ 2-Year Material Warranty: Backed by Renogy for peace of mind.

🔥 Power Bigger. Charge Smarter. Go Further. The Renogy CORE Rover 60A MPPT Solar Charge Controller is your ideal solution for large-scale solar installations, delivering maximum efficiency with superior protection.

💪 Get yours today and power your solar system with confidence! ☀️🔋🏕️

⚡ Renogy CORE Rover 12V/24V 40A MPPT Solar Charge Controller – Smart, Efficient, and Built to Last

The Renogy CORE Rover 40A MPPT Solar Charge Controller is a high-performance, intelligent solution for managing your solar power system. Featuring advanced MPPT technology, 4-stage charging, and comprehensive safety protections, it maximizes solar energy harvest while ensuring battery health. Perfect for off-grid solar systems, RVs, boats, and cabins, this controller offers robust performance and remote monitoring capabilities.

💪 Advanced MPPT Technology – Maximize Your Solar Output:

✅ 40A Rated Charge Current: Efficiently handles large solar arrays.
✅ 12V/24V Auto System Recognition: Automatically detects battery system voltage for non-lithium batteries.
✅ Wide PV Input Voltage Range: Accepts solar input from 15V to 100VDC, ideal for series-connected panels.
✅ High Power Handling:

• 520W for 12V Systems
• 1040W for 24V Systems
  ✅ Tracking and Conversion Efficiency:
• MPPT Tracking Efficiency: Up to 99%
• Peak Conversion Efficiency: Up to 98%

⚙️ Smart 4-Stage Charging for Battery Protection:

✅ 4-Stage Charging:

• Bulk: Rapid recharge phase for fast energy recovery.
• Boost: Maintains a steady charge to complete battery charging.
• Float: Maintains full charge without overcharging.
• Equalization (for non-lithium): Restores battery balance and prevents sulfation.
  ✅ Wide Battery Compatibility: Supports AGM, Gel, Flooded, and Lithium (LiFePO4) batteries.
  ✅ Over-Discharge Recovery: Capable of charging deeply discharged lithium batteries.

📡 Remote Monitoring and Load Control:

✅ RS485 Communication Port: Connects with the Renogy BT-1 Bluetooth Module (sold separately) for real-time monitoring through the Renogy DC Home App.
✅ Load Control Options: Diverse programmable load control settings for lighting systems or appliance control.
✅ Temperature Sensor Included: Adjusts charging based on temperature for extended battery life (-3mV/°C/2V).

🛡️ Built-In Safety Protections for Peace of Mind:

✅ Comprehensive Protection Features: Guards against:

• Overcharging
• Over-discharging
• Short Circuits
• Overloads
  ✅ Negative Grounding Design: Ideal for RV and camper installations.

❄️ Built for All Environments:

✅ Operating Temperature Range: From -35°C to 45°C (-31°F to 113°F)—built for harsh environments.
✅ Storage Temperature Range: From -35°C to 75°C (-31°F to 167°F).
✅ Humidity Tolerance: Up to 90% (no condensation).
✅ IP32 Protection Level: Resists dust and water splashes for indoor installations.

📏 Compact, Durable, and Easy to Install:

✅ Dimensions: 238 x 172 x 77 mm (9.38” x 6.78” x 3.05”)
✅ Weight: 2.0 kg (4.41 lbs)
✅ Wide Terminal Support: Accepts cables up to 8 AWG (10mm²).

🛡️ Certified Safe and Backed by Warranty:

✅ Certifications: CE, FCC Class B Part 15 Compliant.
✅ Warranty: 2-Year Material and Workmanship Warranty.

🔥 Efficient. Smart. Reliable. The Renogy CORE Rover 40A MPPT Solar Charge Controller is your trusted solution for maximizing solar performance and protecting your batteries—perfect for both off-grid and mobile solar applications.

💪 Get yours today and power your solar system with confidence! ☀️🔋🏕️