This is the 3^rd generation of REDARC’s Tow-Pro brake controller with the original released in June 2014 and the acclaimed Tow-Pro Elite released in September 2015.

This next-generation Tow-Pro Elite retains the same name as its predecessor and continues to set the benchmark in trailer brake control technology which has seen it become Australia’s favourite and most trusted brake controller.

Like previous generations, the new Tow-Pro Elite provides users with the ability to swap between Proportional mode (inertia sensing) for highway driving conditions and User-Controlled mode for off-road driving.

Even Smoother Braking Capabilities
Software upgrades have been included in the next generation Tow-Pro Elite which will result in smoother braking for motorists towing heavy trailers and caravans.

Compatible with All Modern Vehicles
The next-generation Tow-Pro Elite ensures compatibility with all new vehicle technology and also still features Active Calibration, works with Electric and Electric/Hydraulic trailer brakes, supports 12 or 24 volt vehicle systems and ensures an ADR approved installation. It has also been approved by AL-KO for use with their ESC and DSC systems.

New-Look Control Knob
The main enhancements to the upgraded Tow-Pro Elite relate to the size and installation of the user interface (remote head). A change to the shape, length, size and depth of the remote head will allow a quicker and easier installation of the Tow-Pro Elite. It also ensures the remote head will fit into thicker and curved dashes found in European vehicles and trucks.

The new Tow-Pro Elite V3 is also designed to work with modern vehicles and selected TPSI switch inserts and TPW wiring kits.

Specifications

• Input (Operating) Voltage: 9 - 32VDC
• Input Fuse Rating: 30A (Cicruit Breaker)
• Standby Current Draw: <10mA
• Output System Voltage: 12VDC
• Output Current Rating (Cont.): 25A
• Length (mm): 85
• Width (mm): 100
• Height (mm): 30
• Weight: 200g

The next generation Manager30 S3 model is the complete battery management system for charging auxiliary batteries used in recreational automotive and marine applications. The dual battery system incorporates AC, DC and solar inputs to achieve the best charge for an auxiliary battery.

Developed with ease of installation in mind, The Manager30 is compatible with all vehicles and alternator systems including variable voltage alternators.

Whether you’re charging Lead Acid, Gel, Calcium, AGM or Lithium Iron Phosphate batteries, The Manager30 represents a complete DC to DC charging and maintenance solution. If you’re charging one auxiliary battery or more, The Manager30 will ensure they’re always fully charged, providing peace of mind when battery charge provides the power source for the comforts of home whilst travelling around Australia.

Charging lithium batteries
Lithium batteries have improved storage capacity relative to size and weight. They do however require specific charging conditions in order to operate correctly and the battery itself must have an in-built cell management system. REDARC have designed a charging profile within The Manager30 to complement these in-built systems.

Green power priority
The Manager30 is designed to charge an auxiliary battery from multiple sources simultaneously. If 12 volt solar power is available, solar power will be used before topping up the output charging current from another source mains (if available) or DC vehicle power when on the move.

MPPT solar regulator
The built-in Maximum Power Point Tracking (MPPT) solar regulator allows The Manager30 to deliver the maximum amount of power from portable solar panels, even during low light conditions.

Remote monitor
Designed to show you auxiliary battery information and charge status. You can customise how your battery is charged and monitor where the charge is coming from.

Input (Operating) Voltage 21 - 33VDC
Output System Voltage 240VAC
Output Power 3000W
Warranty 2 Years
Connection Hard Wire Plate
Length (mm) 442
Width (mm) 255
Height (mm) 158
Weight (kg) 8.2

REDARC BATTERY CHARGER 12V 25A 3 STAGE AUTO BCDC1225D 

This REDARC 25A DC to DC Charger(BCDC1225D) is designed to keep your auxiliary battery charged while driving Next generation charging technology with additional features that make it the most advance dual battery charger on the market.

With the Maximum Power Point Tracking solar regulator the unit will draw charge simultaneously from the solar panels and the alternators. Plus, thanks to the built-in 'Green Power Priority' it will select solar charging first in an effort to reduce the load on your alternator.

The BCDC1225D features the same charging profiles as earlier models, but adds a brand new lithium charging profile to extend its versatility even further by allowing it to charge AGM, Gel, Standard Lead Acid, Calcium and LiFePO4 batteries.

Three-stage DC to DC charging keeps your auxiliary battery charged at the optimum level, plus it can act as a dual battery isolator to protect your starter battery when the voltage drops below appropriate levels.

The BCDC1225D is suited for a battery bank size of 75-200AH, plus it boasts a wide operating range of 9-32V which will suit all 12V to 24V systems on the market.

The BCDC has tested in all conditions you can find in Australia from extreme heat of the Simpson desert to drenching river crossings at the Cape. The BCDC1225D are built to surface water, dust and vibration.

Input (Operating) Voltage 9 - 32VDC
Output System Voltage 12VDC
Maximum Charging Voltage 15.3V
Output Current Rating (Cont.) 25A
Input Fuse Rating 40A
Output Fuse Rating 40A
Type Approval E-Mark
Warranty 2 Years
Standby Current Draw <100mA
Output Power 375W
Width (mm) 120
Height (mm) 37
Length (mm) 165
Weight (kg) 1

Using a Pure Sine Wave output, the 1000W inverter will ensure appliances run smoothly and efficiently, producing less heat and noise.  Now slimmer and lighter, the REDARC 1000W inverter has a wider input voltage in both 12V and 24V models, and works comfortably even in Australia’s harsh conditions.

Run the same devices as the 700W model plus coffee machines and power tools with a 1000W REDARC Pure Sine Wave Inverter.

The 1000W inverter features multiple levels of protection, including overload, short circuit and over-temperature and load controlled cooling fan, which is engaged when power consumption reaches a certain level.

Benefits

• Appliances will run smoother and more efficiently, producing less heat and noise
• Designed to run any 240 volt equipment
• Take all the comforts of home whilst you travel

Features

• Pure Sine Wave output
• Input and output are fully isolated
• Multiple levels of protection; overload, short circuit and over temperature and load-controlled cooling fan

The Redarc Smart Start® is a microprocessor-controlled battery isolator designed for use in multi-battery applications as a solenoid priority system, protecting the start battery from excessive discharge, whilst allowing the auxiliary battery to supply non-essential loads. The Redarc Smart Start® is designed primarily for use in 4WD and commercial vehicles and is available in four models; 12V DC or 24V DC incorporating 100A or 200A continuous ratings. The 200A models are designed for extremely heavy-duty operations. The Redarc Smart Start® is Australia’s most trusted dual battery isolator and is used by 4WD clubs throughout Australia.

Fault Indication Yes
Remote Indicator Yes - Buy separately
Suitability Not suitable for variable voltage Alternators
Surge Protection Yes
Voltage - Off 12.7V
Voltage - On 13.2V
Charge Modes DC
Weight 0.2
Dimensions 75L x 63W x 80H
Brand Redarc
Warranty 2 Years
Amperage - Surge 400A
Amperage 100A
Voltage 12V

The REDARC BCDC1220-IGN is a 12 Volt 20 Amp In-vehicle DC DC charger featuring technology designed to fully charge a lead acid auxiliary battery. It’s suitable for vehicles fitted with an ECU-controlled variable voltage alternator.

The BCDC1220-IGN features a lower voltage setting so it can continue to operate with a low input voltage from the alternator. 

The BCDC dual battery charger will work with a wide operating range (9 – 32V) giving the option of charging from both 12V and 24V vehicle systems.

By providing a unique charging profile to each specific battery type, the BCDC charger is able to achieve and maintain an optimal charge in auxiliary batteries whilst on the move. It will allow you to charge an auxiliary battery that is a different characteristic to the start battery.

The unit will act as a dual battery isolator and protect the start battery, should the voltage get too low.

Proven and Tested

Compact in size, easy to install and fully sealed - water, dust and vibration are no match for the in-vehicle DC smart charger. It can handle the roughest tracks in outback Australia and even deep water crossings at Cape York. The BCDC DC to DC battery charger is suitable for installation in harsh environments or marine applications.

With an ever-increasing number of electrical accessories and devices being used when travelling around Australia, along with more complex vehicle electrical systems than seen in years gone by, having the right battery charging solution has never been more important.

Designed, built and tested in Australia for our unique conditions, the BCDC in-vehicle DC to DC charger won’t let you down.

Features

• Multi-Stage DC to DC Battery Charger
• Start Battery Isolator
• Fully sealed
• No fan for super-quiet operation
• Charges AGM, Gel, Calcium content, VRLA and Standard Lead Acid batteries
• Works with Variable Voltage Alternators

Input (Operating) Voltage 9 - 32VDC
Maximum Charging Voltage 15.4V
Output System Voltage 12VDC
Output Fuse Rating 40A
Standby Current Draw <100mA
Output Current Rating (Cont.) 20A
Input Fuse Rating 40A
Output Power 300W
Length (mm) 120
Warranty 2 Years
Width (mm) 100
Height (mm) 37
Weight (kg) 0.485
Type Approval CE

Using a Pure Sine Wave output, the 700W inverter will ensure appliances run smoothly and efficiently, producing less heat and noise. Now slimmer and lighter, the REDARC 700W inverter has a wider input voltage in both 12V and 24V models, and works comfortably even in Australia’s harsh conditions.

Run the same devices as the 350W inverter plus TV’s and refrigerant recovery machines with a 700W REDARC Pure Sine Wave Inverter.

The 700W inverter features multiple levels of protection, including overload, short circuit and over-temperature and load controlled cooling fan, which is engaged when power consumption reaches a certain level.

Benefits

• Appliances will run smoother and more efficiently, producing less heat and noise
• Designed to run any 240 volt equipment
• Take all the comforts of home whilst you travel

Features

• Pure Sine Wave output
• Input and output are fully isolated
• Multiple levels of protection; overload, short circuit and over temperature and load-controlled cooling fan