Atem Power 12V 25A DC to DC Battery Charger MPPT Dual Battery System Kit Isolator
Regular price
$279.00
Sale price
$159.00
Save $120.00
Gear up for your adventures with the ultimate dual-battery solution: the ATEM POWER 25A DC to DC charger. With its advanced features and superior performance, this DC-DC charger is the perfect companion to keep your batteries fully charged and ready for action, ensuring you never run out of power when you need it most. Unleash convenience with a DC-to-DC charger that goes both ways! From charging your flat starter battery to keeping auxiliary battery charged, this charger has you covered. It's your perfect off-road companion—an upgraded, automatic 4-stage charger. With up to 25A of power, it charges Lead Acid, AGM, Calcium and LiFePO4 batteries efficiently. And say goodbye to compatibility concerns as this DC-to-DC charger adapts seamlessly to the smart alternator inside your vehicle. Tap into the abundant solar power with its MPPT controller, while effortlessly activating your sleeping LiFePO4 battery. Power limitations won't hold you back—conquer the outdoors with confidence! Features
Reverse Charging Ready: Don't let a flat starter battery hold you back! Our charger swiftly breathes life back into your battery to get you back on the road in a flash.
LiFePO4 Activation: Our 25A DC to DC charger sparks life into your sleeping LiFePO4 battery with its LiON mode for an electrifying performance.
Smart Alternator Compatible: Worried about compatibility? Our charger works flawlessly with smart alternators in 4x4s, ensuring a seamless power connection.
Battery Re-selection Made Easy: Switch batteries effortlessly! Our ATEM POWER DC to DC charger allows quick re-selection by long pressing "SELECT."
Dual Input Power: Our charger utilizes the DC source before tapping into solar power, ensuring a stable and consistent energy source for your auxiliary battery.
Advanced Charging Algorithm: Our smart 4-stage charging process optimally charges your batteries, delivering them to their peak levels for extended use.
Wide Battery Compatibility: With our upgraded charging profile, this DC-to-DC charger is compatible with Lead Acid, AGM, Calcium and LiFePO4 batteries.
Intelligent Protection: It comes with built-in safeguards, protecting against reverse polarity, overvoltage, over-temperature, charge timeout, and lithium battery BMS.
Boost Efficiency with MPPT: This DC-to-DC charger includes a MPPT controller, increasing charging efficiency by up to 30% when connected to solar panels.
Convenient Anderson Style Plug: Simplify your setup! Equipped with Anderson style plugs, our DC-to-DC charger makes wiring a breeze, saving you time and effort.
DC Input Voltage Range:
11V~24V
Solar Input Voltage Range:
9V~30V
Max. Input Current:
28A
Output Voltage:
0~15.4V
Max. Output Power:
385W
Rated Output Current:
25A
Standby Current:
<10mA
Charging Profile:
4 Stages
Battery Compatibility:
Lead Acid, AGM, Calcium, LiON(LiFePO4)
IP Rating:
IP-54
Operational Temperature:
-20℃~45℃
Storage Temperature:
-40℃~60℃
Humidity:
0%~90%
Package Size:
316mm(L) x 240mm(W) x 63mm(H)
Package Weight:
1.255Kg
Package Includes
1 x ATEM POWER 25A DC-DC Charger with Anderson Style Plugs
3 x Anderson Style Plugs
1 x User Manual
Warranty
1 Year Warranty
Atem Power 12V 40A DC to DC Battery Charger MPPT
Regular price
$429.00
Sale price
$319.00
Save $110.00
Gear up for your adventures with the ultimate dual-battery solution: the ATEM POWER 40A DC to DC charger. With its advanced features and superior performance, this DC-DC charger is the perfect companion to keep your batteries fully charged and ready for action, ensuring you never run out of power when you need it most. Unleash convenience with a DC to DC charger that goes both ways! From charging your flat starter battery to keeping auxiliary battery charged, this charger has you covered. It's your perfect off-road companion—an upgraded, automatic 3-stage charger. With up to 40A of power, it charges AGM, Gel, Calcium, Lead Acid, and LiFePO4 batteries efficiently. And say goodbye to compatibility concerns as this DC to DC charger adapts seamlessly to the smart alternator inside your vehicle. Tap into the abundant solar power with its MPPT controller, while effortlessly activating your sleeping LiFePO4 battery. Power limitations won't hold you back—conquer the outdoors with confidence! Features
Reverse Charging Ready: Don't let a flat starter battery hold you back! Our charger swiftly breathes life back into your battery to get you back on the road in a flash.
LiFePO4 Activation: Our 40A DC to DC charger sparks life into your sleeping LiFePO4 battery with its LiON mode for an electrifying performance.
Smart Alternator Compatible: Worried about compatibility? Our charger works flawlessly with smart alternators in 4x4s, ensuring a seamless power connection.
Battery Re-selection Made Easy: Switch batteries effortlessly! Our ATEM POWER DC to DC charger allows quick re-selection by long-pressing "SELECT."
Dual Input Power: Our charger utilizes the DC source before tapping into solar power, ensuring a stable and consistent energy source for your auxiliary battery.
Advanced Charging Algorithm: Our smart 3-stage charging process optimally charges your batteries, delivering them to their peak levels for extended use.
Wide Battery Compatibility: With our upgraded charging profile, this DC to DC charger is compatible with AGM, Gel, Calcium, Lead Acid, and LiFePO4 batteries.
Intelligent Protection: It comes with built-in safeguards, protecting against reverse polarity, overvoltage, over-temperature, charge timeout, and lithium battery BMS.
Boost Efficiency with MPPT: This DC to DC charger includes a MPPT controller, increasing charging efficiency by up to 30% when connected to solar panels.
Convenient Anderson Style Plug: Simplify your setup! Equipped with Anderson style plugs, our DC to DC charger makes wiring a breeze, saving you time and effort.
Max. Battery Input Voltage:
24V
Min. Solar Input Voltage:
13V
Max. Solar Input Current:
40A
Max. Solar Input Voltage:
26V
Max. Output Current:
40A
DC Input Voltage:
12V(ACC ON),11.3V (ACC OFF),MAX 24V
Rated Charging Current:
40A MAX (IN/OUT)
Charging Voltage Range:
7~15.4V
Operational Temperature (Ambient):
-20℃~45℃
Humidity:
0%~90%
Soft Start:
YES
Soft Charge Current:
4A
Bulk Charge Voltage:
12V
Package Size:
28.7x19.5x6.5cm
Gross Weight:
1.46kg
Package Includes
1x ATEM POWER 40A DC-DC Charger with Anderson Style Plugs
3 x Anderson Style Plugs
1 x User Manual
Warranty
1 Year Warranty
Atem Power 12V 25A DC to DC Battery Charger Dual Battery System Kit + Smart Hub
Regular price
$349.00
Sale price
$249.00
Save $100.00
Gear up for your adventures with the ultimate dual-battery solution: the ATEM POWER 25A DC to DC charger. With its advanced features and superior performance, this DC-DC charger is the perfect companion to keep your batteries fully charged and ready for action, ensuring you never run out of power when you need it most. Unleash convenience with a DC-to-DC charger that goes both ways! From charging your flat starter battery to keeping auxiliary battery charged, this charger has you covered. It's your perfect off-road companion—an upgraded, automatic 4-stage charger. With up to 25A of power, it charges Lead Acid, AGM, Calcium and LiFePO4 batteries efficiently. This DC-to-DC smart hub comes with dual voltage meters to view the real-time voltage status of the main battery & the auxiliary battery. It features marks for all terminals & connectors on the top panel and colour coded Anderson plugs for easy connection.
Features
Reverse Charging Ready: Don't let a flat starter battery hold you back! Our charger swiftly breathes life back into your battery to get you back on the road in a flash.
LiFePO4 Activation: Our 25A DC to DC charger sparks life into your sleeping LiFePO4 battery with its LiON mode for an electrifying performance.
Smart Alternator Compatible: Worried about compatibility? Our charger works flawlessly with smart alternators in 4x4s, ensuring a seamless power connection.
Battery Re-selection Made Easy: Switch batteries effortlessly! Our ATEM POWER DC to DC charger allows quick re-selection by long pressing "SELECT."
Dual Input Power: Our charger utilizes the DC source before tapping into solar power, ensuring a stable and consistent energy source for your auxiliary battery.
Advanced Charging Algorithm: Our smart 4-stage charging process optimally charges your batteries, delivering them to their peak levels for extended use.
Wide Battery Compatibility: With our upgraded charging profile, this DC-to-DC charger is compatible with Lead Acid, AGM, Calcium and LiFePO4 batteries.
Intelligent Protection: It comes with built-in safeguards, protecting against reverse polarity, overvoltage, over-temperature, charge timeout, and lithium battery BMS.
Boost Efficiency with MPPT: This DC-to-DC charger includes a MPPT controller, increasing charging efficiency by up to 30% when connected to solar panels.
Convenient Anderson Style Plug: Simplify your setup! Equipped with Anderson style plugs, our DC-to-DC charger makes wiring a breeze, saving you time and effort.
DC-DC charger
DC Input Voltage Range:
11V~24V
Solar Input Voltage Range:
9V~30V
Max. Input Current:
28A
Output Voltage:
0~15.4V
Max. Output Power:
385W
Rated Output Current:
25A
Standby Current:
<10mA
Charging Profile:
4 Stages
Battery Compatibility:
Lead Acid, AGM, Calcium, LiON(LiFePO4)
IP Rating:
IP-54
Operational Temperature:
-20℃~45℃
Storage Temperature:
-40℃~60℃
Humidity:
0%~90%
Package Size:
316mm(L) x 240mm(W) x 63mm(H)
Package Weight:
1.255Kg
Smart Hub
Housing Material:
Steel
Amperage Rating:
50A
Compatible Batteries:
Wet, Calcium, AGM, Gel, LiFePo4
Package Dimension:
31.7 x 23.8 x 15cm
Gross Weight:
1.32kg
Package Includes
1 x ATEM POWER 25A DC-DC Charger with Anderson Style Plugs
1 x ATEM POWER DC to DC Smart Hub
2 x Installation Manual
7 x Anderson Plugs
Warranty
1 Year Warranty
ATEM POWER 40A DC to DC Battery Charger MPPT 12V Dual Battery System + Smart Hub
Regular price
$565.00
Sale price
$429.00
Save $136.00
Gear up for your adventures with the ultimate dual-battery solution: the ATEM POWER 40A DC to DC charger. With its advanced features and superior performance, this DC-DC charger is the perfect companion to keep your batteries fully charged and ready for action, ensuring you never run out of power when you need it most. Unleash convenience with a DC to DC charger that goes both ways! From charging your flat starter battery to keeping auxiliary battery charged, this charger has you covered. It's your perfect off-road companion—an upgraded, automatic 3-stage charger. With up to 40A of power, it charges AGM, Gel, Calcium, Lead Acid, and LiFePO4 batteries efficiently. And say goodbye to compatibility concerns as this DC to DC charger adapts seamlessly to the smart alternator inside your vehicle. Tap into the abundant solar power with its MPPT controller, while effortlessly activating your sleeping LiFePO4 battery. Power limitations won't hold you back—conquer the outdoors with confidence! Features
Reverse Charging Ready: Don't let a flat starter battery hold you back! Our charger swiftly breathes life back into your battery to get you back on the road in a flash.
LiFePO4 Activation: Our 40A DC to DC charger sparks life into your sleeping LiFePO4 battery with its LiON mode for an electrifying performance.
Smart Alternator Compatible: Worried about compatibility? Our charger works flawlessly with smart alternators in 4x4s, ensuring a seamless power connection.
Battery Re-selection Made Easy: Switch batteries effortlessly! Our ATEM POWER DC to DC charger allows quick re-selection by long-pressing "SELECT."
Dual Input Power: Our charger utilizes the DC source before tapping into solar power, ensuring a stable and consistent energy source for your auxiliary battery.
Advanced Charging Algorithm: Our smart 3-stage charging process optimally charges your batteries, delivering them to their peak levels for extended use.
Wide Battery Compatibility: With our upgraded charging profile, this DC to DC charger is compatible with AGM, Gel, Calcium, Lead Acid, and LiFePO4 batteries.
Intelligent Protection: It comes with built-in safeguards, protecting against reverse polarity, overvoltage, over-temperature, charge timeout, and lithium battery BMS.
Boost Efficiency with MPPT: This DC to DC charger includes a MPPT controller, increasing charging efficiency by up to 30% when connected to solar panels.
Convenient Anderson Style Plug: Simplify your setup! Equipped with Anderson style plugs, our DC to DC charger makes wiring a breeze, saving you time and effort.
DC to DC Charger
Max. Battery Input Voltage:
24V
Min. Solar Input Voltage:
13V
Max. Solar Input Current:
40A
Max. Solar Input Voltage:
26V
Max. Output Current:
40A
DC Input Voltage:
12V(ACC ON),11.3V (ACC OFF),MAX 24V
Rated Charging Current:
40A MAX (IN/OUT)
Charging Voltage Range:
7~15.4V
Operational Temperature (Ambient):
-20℃~45℃
Humidity:
0%~90%
Soft Start:
YES
Soft Charge Current:
4A
Bulk Charge Voltage:
12V
Package Size:
28.7x19.5x6.5cm
Gross Weight:
1.46kg
Smart Hub
Housing Material:
Steel
Amperage Rating:
50A
Compatible Batteries:
Wet, Calcium, AGM, Gel, LiFePo4
Package Dimension:
31.7 x 23.8 x 15cm
Gross Weight:
1.5kg
Package Includes
1x ATEM POWER 40A DC-DC Charger with Anderson Style Plugs
3 x Anderson Style Plugs For Anderson Style Plugs
1 x User Manual For Anderson Style Plugs
1 x ATEM POWER DC to DC Smart Hub
1 x User Manual For Smart Hub
4 x Anderson Plugs For Smart Hub
Warranty
1 Year Warranty
DC to DC Dual Battery System Smart Hub Universal Fitment Dual Voltage Meters
Regular price
$165.95
Sale price
$89.00
Save $76.95
Discover the ultimate convenience with our smart hub - the perfect answer to cable management & efficient charging in the dual battery system. Say goodbye to cable clutter and enjoy the convenience of monitoring voltage status with two voltage meters, gaining complete control over auxiliary battery's charging process. Compatible with an array of DC-DC chargers, ATEM POWER smart hub works with various battery types - wet, calcium, AGM, Gel, and LiFePo4, offering a comprehensive power solution catered to your specific needs. Enjoy easy installation anywhere in your vehicle with our smart hub's compact design. Our color-coded Anderson plugs streamline the process, saving you time and frustration. Crafted with durability in mind, our dual battery system smart hub features a robust steel housing and high-quality connectors, ensuring reliable performance and longevity even in harsh conditions. Features
Dual Voltage Meters: Equipped with dual voltage meters, our smart hub allows you to view the real-time voltage status of the main battery and the auxiliary battery.
Cable Management: For efficient cable organization in your dual battery system, ATEM POWER dual battery system smart hub comes in rather handy.
Universal Fitment: Our smart hub is seamlessly compatible with a wide range of DC-DC chargers, including ATEM POWER, CTEK, RENOGY, REDARC, and Projecta.
Multi Battery Selection: Our dual battery system smart hub supports wet, calcium, AGM, Gel, and LiFePo4 batteries, offering versatile power options.
Hassle-Free Installation: Easily install our compact smart hub anywhere in the vehicle, from the engine bay to under a seat, saving you valuable space.
Easy Connection: Featuring color-coded Anderson plugs, our dual battery system smart hub ensures easy differentiation and connection.
Durable Construction: Built to resist harsh conditions, our smart hub boasts a sturdy steel housing and quality connectors for long-lasting durability.
Quick Status Check: The integrated LED indicator allows you to effortlessly check the working status of your REDARC or PROJECTA DC-DC charger right on our smart hub.
NOTE: Please be aware that this is NOT a charger but a hub.
Manufacturer Number:
VABGHUB-AP
Brand:
ATEM POWER
Housing Material:
Steel
Amperage Rating:
50A
Color:
Black
Compatible Batteries:
Wet, Calcium, AGM, Gel, LiFePo4
Product Dimension:
20.5cm x 11.8cm x 4.1cm
Package Dimension:
25cm x 16.6cm x 7.8cm
Gross Weight:
1.08kg
Package Includes
1 x ATEM POWER DC to DC Smart Hub
1 x Installation Manual
2 x Grey Anderson Plugs
1 x Yellow Anderson Plug for Solar
1 x Red Anderson Plug for Alternator
Warranty
1 Year Warranty
AGM Deep Cycle Dual Battery Package
Regular price
$879.00
Sale price
$729.00
Save $150.00
Here at Aussie Outback Store we have taken the hassle out of trying to get everything you need to set up your rig. This package is ideal for your second battery in the ute, camper or caravan. Moving on this package has what you need to charge from the sun with the 130w solar panel and mounting brackets, also with the ability to charge your 135ah AGM battery from the DC-DC charger while your driving. With the 20amp DC-DC charger supplied in this package it is compatible to suit your new battery and also has the MPPT solar controller built in to hook your solar panel to direct rather than having a separate solar controller.
This Package includes:
1x 130w Fixed Solar Panel (Including Z mounting brackets)
1x 135ah ATEM Power AGM Deep cycle Battery
1x 25amp Atem Power DC-DC Charger
Below are the specs of each item included in the package:
Solar Panel
Maximum Power(Pmax) 130W Open-Circuit Voltage 22.5V Short-Circuit Current 7.55A Maximum Power Voltage 18.3V Maximum Power Current 7.10A Maxium System Voltage 1000 VDC Temperature Range -40°C to +85°C Solar Cell Mono Product Dimension 1010x30x670mm Gross Weight 8.2kg
Battery
Brand: ATEM POWER Rated capacity (10 hour rate): 135Ah Voltage: 12V Nominal voltage: 12V Float charge (Constant Voltage): Voltage: 13.5 - 13.8V at 25°C (77°F) Cycle Charge (Constant Voltage): Initial Charging Current less than 25A | Voltage 14.4-15.0V at 25°C (77°F) Max Initial Current: Less than 40.5A Max discharge current: 600A (5s) at 25°C (77°F) Self-discharge capacity: 3 Months = 91% | >6 Months = 82% | >12 Months = 64% Capacity affected by temperature: 40°C = 102% | 25°C = 100% | 0°C = 85% | -15°C = 65 Internal Resistance: Approx. 6.0mΩ Package Dimensions: 400x245x315mm Package Weight: 29.5kg
DC-DC Charger
Type:Multi Stage Solar Input: 16.0-25.0 Volts Output/Charging Voltage: 14.4~15.4 Volts (Stops charging when alternator output or vehicle battery below 12.5 volts) Output Current: DC Output: 25A Solar Output: 25A Minimum Start Voltage: 2.5 Volts-For battery being charged. Bulk Charge Voltage: 14.7V(AGM/Gel)14.4V (Lead Acid)15.4V (Calcium)14.4V (LiFePO4) Absorption: Constant voltage with automatic amperage control Equalisation: Automatic Float Charge Voltage: 13.5V(AGM/Gel)13.5V (Lead Acid)13.5V (Calcium) Float Charge Current: 100mA
Enerdrive EPOWER 1000W/12V PSW INVERTER
Regular price
$829.00
Sale price
$549.00
Save $280.00
With ePOWER’s state of the art, easy to use design, this 1000W inverter will offer you reliable service for providing AC power and 5V USB power for your home, boat, caravan, 4WD or commercial vehicle.
The Enerdrive ePOWER 1000W Inverter can run many AC powered appliances when you need AC power anywhere. The 5V USB power can charge many USB powered devices.
Australian GPO Outlets
True sine wave output is ideal for operating motor loads, and to reduce stress on surge protection circuitry, meaning potentially longer equipment life
Audio alarm with warning/error codes to alert user to check inverter condition before unit shutdown
Automatic shutdown protects overload, over temperature and low/high battery conditions
High surge capacity for products that require more power to start (2 x constant)
High efficiency conversion of battery available power to AC power
Mounting brackets for permanent installation
Heavy duty DC battery stud connectors
Includes 5V USB port
Model – Description
ePOWER 400
ePOWER 1000
ePOWER 2000
Part Number
EN1104S
EN1110S
EN1120S
AC Output Power
400W
1000W
2000W
AC Output Current
1.74A
4.3A
8.7A
AC Output Voltage
230 Vac / 50 Hz
AC Output Waveform
True Sinewave
AC Output Socket
1 outlet
1 outlet
2 outlets
Nominal DC Input Voltage
12.5 VDC
No Load battery draw
< 0.8 ADC
< 1.2 ADC
< 1.2 ADC
DC Input Voltage operating range
10.5 – 15.5 VDC
Under Voltage Alarm
11.2 VDC
Under Voltage Shutdown
10.5 VDC
Under Voltage Recovery
11.8 VDC
Over Voltage Shutdown
15.5 VDC
USB
5V, 750mA
5V, 2.1A
Safety and Environmental
Conformance
All required Australian Standards
Agency Markings
RCM
Operating Temperature
0°C to 40°C
Storage Temperature
-20°C to 60°C
Relative Humidity
5-90% noncondensing
Operating Altitude
Up to 3000 meters above sea level
Weights and Dimensions
Weight
1.73Kg
2.9Kg
5.5Kg
Dimensions (W x L x H)
177 x 200 x 90mm
177 x 325 x 90mm
230 x 416 x 110mm
Warranty
5 Years
Load
Consumption
Estimate Run time
Cordless Phone
5W
80 hrs
Clock/Radio
8W
65 hrs
Table Lamp
40W/60W
22 hrs/ 15 hrs
Freezer (8.8 cu. ft.)
80W
12 hrs
20″ LCD TV
100W
10.5 hrs
Refrigerator (18 cu. ft.)
120W
8.3 hrs
Microwave (mid-size)
1000W
44 min
Coffee Maker
1200W
35 min
Vacuum
1400W
28 min
Enerdrive ePOWER 12V 40A Battery Charger EN31240
Regular price
$680.00
Sale price
$599.00
Save $81.00
40A Battery Charger Features:
Multi stage Charging: Fully automatic multistage battery charger with the ability to charge 3 separate battery banks.
Separate Battery Banks: Isolated charging design where battery bank one is separate from battery bank two and three.
Programmable: Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3.
Current Control: User adjustable current output (e.g. Dial the 60amp unit back to run off a 1kVA generator).
Smart Charging: The ePOWER 40A battery charger will regulate its output based on the loads connected to your battery banks.
Wide AC Input Range: Operates on both 110V / 60Hz and 240V / 50Hz.
LED Display: Easy to use “set and select” menu along with scrolling charger status.
Silent Mode: Disables the cooling fan for total silent operation at night or whenever required. Activation reduces charge output by half and locks out fan for 12 hours.
Temperature Sensor: Battery temperature sensor included with 3 meter cable.
5 Year Warranty from an Australian company renowned for customer support.
Multistage Charging Process
The Enerdrive ePOWER 40A Battery Charger is a fully automatic, “set and forget” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently.
As dictated by battery manufacturer’s recommendations, batteries require a multistage charge sequence for perfect, fast and accurate charging. Our ePOWER multistage smart 40A battery charger delivers four primary charge stages:-
Stage 1 – Bulk or Boost Charge; The battery is charged at full rated output current of the charger until the battery reaches its final charging voltage, known as its absorption voltage. In this step, around 80% of the battery capacity is recovered as fast as possible.
Stage 2 – Absorption Charge; With the charger voltage held steady the remaining 20% is replaced allowing the current to drop as the battery approaches its full charge.
Stage 3 – Float; Finally, in the float stage the charger voltage is lowered and held at a constant and safe predetermined level. This prevents the battery from being overcharged while supporting any additional loads connected to the battery, such as DC lighting and refrigerators. This stage allows for the charger to be used as a DC power supply.
Stage 4 – Maintenance; This stage is a regular timed “return to bulk” stage. After 7 days of constant operation in “float” the Enerdrive ePOWER Battery Charger will switch the charger from float to bulk to agitate the batteries electrolyte helping to provide an extended service life.
1 PRIORITY – Charge Where You Need it Most
The ePOWER 40A Battery Charger delivers a priority charge to Bank 1, or your main house battery bank which allows the charger to get this bank recharged the quickest, then transition the cycle to the lesser bank 2 & 3 batteries.
The priority function also allows you to have a battery chemistry different to the other two, such as an AGM battery for house and lead calcium for your start banks.
In the event that all 3 banks are in need of a charge, an over-ride function helps recover all 3 banks quickly and evenly before switching back to prioritise on Bank 1.
All About Lithium
The recent advances in high capacity Lithium battery technology have seen the need to develop a battery charger suited to their needs. With most traditional ‘smart’ chargers their suitability to Lithium batteries is limited. Lithium batteries require a constant current / constant voltage charge algorithm and are unique in that almost every amp-hour of charge delivered by the charger is accepted as one amp hour into the battery, hence the need to deliver a constant current as long as possible.
The Enerdrive ePOWER charger can be programmed for Lithium batteries. This setting delivers the full rated output of the charger constantly with the charger switching to power supply mode once the voltage peak is met (indicating a full battery bank). The graph shows the ePOWER charger algorithm perfectly supporting Lithium battery requirements.
The Display Panel
The ePOWER 40A Battery Charger display gives you all the information you need for the operation of your charger. At a glance, key information such as charger amps, battery voltage and charge state continually alternate on the screen.When in float / power supply mode, the load amps are displayed so you can see exactly what the charger is doing. The display also allows you to program all settings of the charger, as well as activate the silent mode.
Silence when you need it – By pressing the “SEL” button for 5 seconds, the ePOWER Charger enters the ‘Silent’ mode that prohibits the fan from working. This ensures totally silent and safe operation at night, ideal if the charger is located close to your sleeping quarters. Silent mode limits current output to no more than 50%, and is programmed to remain on for 12 hours before automatically returning to a normal ‘fan-on & full output’ setting.
Battery Temperature Sensor
Included standard with all ePOWER Battery Chargers.
Model
EN31220
EN31240
EN31260
EN32430
CHARGER OUTPUT
Output Current (Maximum)
20A
40A
60A
30A
OUTPUT VOLTAGE RANGE
Charge
14.2 – 15.5 V
28.4 – 31.0V
Float
13.4 – 13.8 V
26.8 – 27.6V
– Equalize
16.0 V
32.0V
Charging Control
Four stages (Bulk/Absorption/Float/Maintenance)
Two stages (Bulk/Absorption)
Constant Power Supply (Program setting)
Priority Battery Bank Charging
DC Output Bank
Three (1 fully independent, 2 common with diode isolation)
Selectable Battery Type
Gel, AGM, Flooded, Lithium, Program
Standby Current
< 2 mA
CHARGER INPUT
AC Input Voltage (Nominal)
90 to 265 VAC
AC Input Operating Range
207-265 Vac (2.0 A Max)90-125 Vac (3.8 A Max)
207-265 Vac (3.8 A Max)90 – 125 Vac (7.7 A Max)
207-265 Vac (5.9 A Max)90-125 Vac (11.3 A Max)
207-265 Vac (5.9 A Max)90-125 Vac (11.3 A Max)
AC Input Frequency Range
47 – 63 Hz
Power Consumption
350W (Full Load)
700W (Full Load)
1050W (Full Load)
1050W (Full Load)
Power Factor Correction
Yes
Charger Efficiency
> 82%
PROTECTION AND FEATURES
Reverse Polarity
Yes, (with user replaceable fuse/s)
Over Charge
Yes, unit shutdown
Over Temperature
Yes, unit de-rated and shutdown
Output Short Circuit
Yes, (with user replaceable fuse/s)
Cooling
Forced air ventilation (thermo controlled fan)
Temperature Setting
Hot, Normal, Cold (no sensor connected)
Battery Temp Sensor Port
RJ12 (standard battery temp. sensor supplied)
DISPLAY
LCD Display (with back light)
Charging status, Battery Voltage, Output Current & Fault Codes.
AC INPUT AND DC OUTPUT CONNECTION
AC Input Connection
IEC with Supplied 1.2M Power Lead
DC Output Connection
Heavy Duty Terminal (3 banks) – Pan Heads 6mm Thread
DC Output Ground
Single Heavy Duty Common Ground Stud
ENVIRONMENTAL AND OPERATING TEMPERATURE
Storage Range
-40° to 70° C
Operating Range
-20° to 60° C
Humidity
5-95%, relative humidity non-condensing
Ingress Protection
IP32 (Basic drip proof in vertical orientation)
Base Unit Weight and Dimensions
Weight: (kg)
2.4
2.6
4
4
Dimension: (mm) L x W x H
295 x 206 x 86
295 x 206 x 86
356 x 206 x 99
356 x 206 x 99
Optional Accessories
Remote Digital Display / Enerdrive Part Number EN3REM
Regulatory Compliance
Complies with AS/NZS 60335.2.29 Including Australian deviations.
HULK REMOTE LCD DISPLAY FOR HU6525/HU6540 DC-DC BATTERY CHARGERS
Regular price
$199.00
Sale price
$159.00
Save $40.00
The HULK Professional Series LCD Battery Monitor Display is suitable for use with both the 25 and the 40amp HULK Professional Series DC-DC Battery chargers. It provides the precise status of your battery system and charger.
The user can select from three default screens that display critical information on the status of the auxiliary battery, output current, output voltage and input voltage. Backlight intensity can be dimmed during night viewing or increased during the day. The display can be fixed on any flat surface with either screws or adhesive tape or alternatively, using the swivel arm, the unit can be set at the desired viewing angle.
The display features auto standby for low power consumption and is equipped with a 3.5m Data cable with a Type C Connector. All connections are extremely secure and designed to withstand the toughest of conditions.
Enerdrive 12V 40A DC2DC+ Battery Charger EN3DC40+
Regular price
$629.00
Sale price
$569.00
Save $60.00
Features
Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output
DC M6 screw terminals that will allow for large battery cable connection between all sources
A dedicated Maximum Power Point (MPPT) solar regulator
The same battery algorithms as included in our AC mains ePOWER battery charger. GEL, AGM, Flooded, Lithium and the ability to create a full custom profile
Vehicle input allows for either 12 or 24v and a maximum solar input of 45V/800W
40A+ output up to 40+°C with thermo controlled fan cooling
Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage
Temperature sensor included with charger for more accurate battery charging
The Enerdrive ePOWER DC2DC+ Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in built Maximum Power Point Tracking (MPPT) Solar Controller. With two inputs available, the main/house battery will be charged from either the engine while underway, or via the solar panels when stationary. The process to choose either engine or solar is fully automatic and both functions are controlled from within the unit itself without the need for external relays.
During normal operation the ePOWER DC2DC+ Battery Charger will do a full charge cycle to float stage on the house battery bank with ability to choose either GEL, AGM, Flooded, Custom Programmable or Lithium. Once float stage is reached the charger transitions to a power supply mode to support any on-board DC loads.
Multistage Charging Process
The ePOWER DC2DC+ Battery Charger is a fully automatic, set and forget charger. It is designed to quickly and accurately recharge your deep cycle batteries utilising charger algorithms that help to maximise the life of your specialised deep cycle batteries.
The ePOWER DC2DC+ Battery Charger features multistage smart charging technology that enables the charger to be connected to your battery bank permanently. With the input of multiple sources, you can be assured of charging your batteries whenever underway; or when the sun is shining on your solar array.
As dictated by battery manufacturer’s recommendations, deep cycle batteries require a multistage charge sequence for perfect, fast and accurate charging. The Enerdrive ePOWER DC2DC+ smart charger delivers three primary charge stages.
Stage 1 – Bulk or Boost charge; The battery is charged at full rated output current of the charger until the battery reaches its final charging voltage, known as its absorption voltage. In this step, around 80% of the battery is recovered as fast as possible.
Stage 2 – Absorption Charge; With the charger voltage held steady, the remaining 20% is replaced with the charger allowing the current to taper off as the battery approaches full charge.
Stage 3 – Float; Finally, in the float stage the charger voltage is lowered and held at a constant and safe predetermined level. This prevents the battery from being overcharged, yet allows the charger to supply enough current to make up for the self-discharge losses of the battery, while supporting any additional loads connected to the battery (such as DC lighting and refrigerators). This stage allows for the charger to be used as a DC power supply.
Smart Charging Feature
The ePOWER DC2DC+ Battery Charger will regulate its output based on the loads connected to your battery bank. This function is important to maintain the life of your battery bank as some battery chargers mistake loads for discharge and continue to keep the batteries in the bulk or absorption stage for extended periods of time, which will damage the battery bank. The ePOWER DC2DC+ Battery Charger has two methods of load based regulation to ensure your battery charger transitions to float when it should do so.
Battery Temperature Sensor
Included standard with all ePOWER Battery Chargers.
Specifications
DC2DC+ Battery Charger
Model
EN3DC40+
Output Rating
Output Voltage
12V Nominal (8.0V min)
Output Current (Maximum)
40A ~ 50A
Output Power
775W
Charger DC Output (CH1):
Selectable Battery Type
Gel, AGM, Flooded, Lithium, Program
Charger Voltage Range
13.8V – 15.5V
Float Voltage Range
13.0V – 13.8V
Charger Current (User Selectable)
5/10/15/20/25/30/35/40/45/50A (default 40A)
Equalize Voltage (Flooded Battery)
15.5V
Equalize Charging Current
10% of Bulk Current Setting
Charging Control
2 stage / 3 stage selectable (Default 3 stage)
DC Output Bank
Single
Current draw from CH1 when not in use
< 50mA
Battery Temperature Setting
Low/ Normal/ High (Battery Temperature Sensor Standard)
Note: Specifications subject to change without notice.
Maximising your Solar Harvest using the DC2DC+
The Solar Input on the DC2DC+ unit has a maximum rated INPUT current of 30amps. This means it is optimised for using higher voltage ‘grid’ type modules for best output performance. The maximum achievable output using standard 20Voc solar modules will be approx 35amps @ 14.4Vdc
Panel Array
Rated Wattage & Volts
Open Circuit rating
Estimated DC Amps Output (## See Below)
1
150watt @ 20Voc
150watts
10
1
200watt @ 43Voc
200watts
13
2
150watt @ 20Voc
300watts
21
2
200watt @ 43Voc
400watts
27
3
150watt @ 20Voc
450watts
31
3
200watt @ 43Voc
600watts
42
4
150watt @ 20Voc
600watts
35*
4
200watt @ 43Voc
800watts
47**
5
150watt @ 20Voc
1000watts
Not Recommended
5
200watt @ 43Voc
1000watts
Not Recommended
* Maximum achievable output on the DC2DC+ unit when using 20Voc Solar Panels will be the approx 35amps. ** Maximum achievable output on the DC2DC+ unit when using 43Voc Solar Panels will be the approx 47amps.
## IMPORTANT NOTE: Estimated Amps Output is quoted based upon PERFECT Solar conditions including Sun Angle, Panel Mounting angle and Orientation to the sun. It needs to be noted that panel performance alters dramatically between Summer and Winter periods and actual performance may be impossible to predict.
ATEM POWER 12V 60A DC to DC Battery Charger MPPT Dual Battery System Lithium AGM
Regular price
$463.95
Sale price
$349.00
Save $114.95
Gear up for your adventures with the ultimate dual-battery solution: the ATEM POWER 60A DC to DC charger. With its advanced features and superior performance, this DC-DC charger is the perfect companion to keep your batteries fully charged and ready for action, ensuring you never run out of power when you need it most. The ATEM POWER DC to DC charger is an upgraded, automatic 3-stage charger that delivers up to 60A of power. It efficiently charges AGM, Gel, Calcium, Lead Acid, and LiFePO4 batteries, so you don't have to worry about compatibility concerns. Moreover, it seamlessly adapts to the smart alternator inside your vehicle. By incorporating the integrated MPPT controller, it unlocks the abundant solar power's full potential, ensuring optimal utilization. Additionally, it effortlessly activates your sleeping LiFePO4 battery. With this charger, power limitations will never hold you back. You can confidently conquer the outdoors and enjoy your adventures to the fullest. Features
LiFePO4 Activation: Our 60A DC to DC charger sparks life into your sleeping LiFePO4 battery with its LiFePO4 mode for an electrifying performance.
Smart Alternator Compatible: Worried about compatibility? Our charger works flawlessly with smart alternators in 4x4s, ensuring a seamless power connection.
Battery Re-selection Made Easy: Switch batteries effortlessly! Our ATEM POWER DC to DC charger allows quick re-selection by long-pressing "POWER."
Dual Input Power: Our charger utilizes the DC source before tapping into solar power, ensuring a stable and consistent energy source for your auxiliary battery.
Advanced Charging Algorithm: Our smart 3-stage charging process optimally charges your batteries, delivering them to their peak levels for extended use.
Wide Battery Compatibility: With our upgraded charging profile, this DC to DC charger is compatible with AGM, Gel, Calcium, Lead Acid, and LiFePO4 batteries.
Intelligent Protection: It comes with built-in safeguards, protecting against reverse polarity, short circuit and over-temperature and battery analysis.
Boost Efficiency with MPPT: This DC to DC charger includes a MPPT controller, increasing charging efficiency by up to 30% when connected to solar panels.
Convenient Anderson Style Plug: Simplify your setup! Equipped with Anderson style plugs, our DC to DC charger makes wiring a breeze, saving you time and effort.
Ultimate Versatility: This compact DC to DC charger is a must-have for 4WDs, caravans, RVs, trucks, campers, trailers, campervans, commercial vehicles, and boats.
1 x ATEM POWER 60A DC-DC Charger with Anderson Style Plugs
1 x User Manual
Warranty
1 Year Warranty
Atem Power 100AH 12V LiFePO4 Lithium Battery + 12V 40A DC to DC Battery Charger
Regular price
$1,039.00
Sale price
$819.00
Save $220.00
It's never too late to upgrade your lead-acid battery to our LiFePO4 battery, delivering peak performance for camping, RV, or backup power needs. With impressive 80~90% discharge capability, our lithium battery offers higher usable capacity, boasting twice the power of a comparable AGM battery at only 1/3 the weight. Crafted with A grade cells, ATEM POWER lithium LiFePO4 battery features bolted cell terminals for superior amperage delivery and conductivity. Our 12V 100Ah lithium ion battery is engineered to deliver 2,000 rounds of usage, significantly outlasting lead-acid counterparts. It guarantees that you can rely on our LiFePO4 battery for extended periods without the need for frequent replacements. Our 12V 100Ah lithium ion battery provides a reliable energy source for camping fridges, 12V lights, and high power appliances like electric ovens and space heaters thanks to its capability of max 200A (≤7S) / continuous 100A discharge current with built-in BMS protection. Features
A Grade Cell: Crafted with A grade cells, our lithium LiFePO4 battery boasts bolted cell terminals for enhanced amperage delivery and superior current conductivity.
Extended Lifespan: With the ability to provide impressive 2,000 rounds of usage, ATEM POWER LiFePO4 battery outlasts its lead-acid counterparts by multiple folds.
Lightweight Design: Our 12V 100Ah lithium ion battery delivers twice the power of a comparable lead-acid battery at just one third of the weight.
High Power Output: With max 200A (≤7S) / continuous 100A discharge current, our LiFePO4 battery powers high wattage appliances like microwaves or coffee machines.
Rapid Charging: Featuring reduced internal resistance, our lithium battery boasts swift charging capability for a quick recharge process and shorter downtime between uses.
Unmatched Versatility: Our 12V 100Ah lithium ion battery is designed to power camping fridges, 12V lights and more for your camping, RV, or backup application.
Flexible Configurations: You can connect two 12V 100Ah lithium ion batteries in series or parallel to achieve your desired voltage and amp-hour capacity.
High Quality BMS: It offers protection against over or under temperature, high or low voltage, overload and short circuit, and smart cell balancing for enhanced reliability.
Safety Assured: Our lithium battery exhibits thermal stability, effectively eliminating explosion risks and maintaining optimal discharge performance from -20℃ to 70℃.
Lithium Battery
Nominal Capacity:
100Ah
Nominal Voltage:
12.8V
Life Cycle:
2,000 Cycles
Charge Voltage:
10V-14.6V
Max. Continuous Charge Current(25°C):
50A
Max. Continuous Discharge Current(25°C):
100A
Max. Charge Current:
50A
Max. Discharge Current(≤7S):
200A
Internal Impedance:
≤10mΩ
Charge Temperature:
0°C~60°C
Discharge Temperature:
-20~70°C
Standard Operation Temperature:
-20~70°C
Self-discharge Rate(per month):
2%
Max. Modules in Series/Parallel:
2S/2P
Package Dimension:
41cm x 26.5cm x 30cm
Gross Weight:
13.65kg
40A DC-DC Charger
Max. Battery Input Voltage:
24V
Min. Solar Input Voltage:
13V
Max. Solar Input Current:
40A
Max. Solar Input Voltage:
26V
Max. Output Current:
40A
DC Input Voltage:
12V(ACC ON),11.3V (ACC OFF),MAX 24V
Rated Charging Current:
40A MAX (IN/OUT)
Charging Voltage Range:
7~15.4V
Operational Temperature (Ambient):
-20℃~45℃
Humidity:
0%~90%
Soft Start:
YES
Soft Charge Current:
4A
Bulk Charge Voltage:
12V
Package Size:
28.7x19.5x6.5cm
Gross Weight:
1.46kg
Package Includes
1 x ATEM POWER 100Ah Lithium Iron Phosphate Battery
Set of Screws & Nuts
1 x User Manual For Lithium Battery
1x ATEM POWER 40A DC-DC Charger with Anderson Style Plugs
3 x Anderson Style Plugs For DC-DC Charger
1 x User Manual For DC-DC Charger
Warranty
3 Years Warranty For Lithium Battery 1 Year Warranty For Battery Charger
Atem Power 100AH 12V LiFePO4 Lithium Battery + 12V 25A DC to DC Battery Charger
Regular price
$845.00
Sale price
$650.00
Save $195.00
It's never too late to upgrade your lead-acid battery to our LiFePO4 battery, delivering peak performance for camping, RV, or backup power needs. With impressive 80~90% discharge capability, our lithium battery offers higher usable capacity, boasting twice the power of a comparable AGM battery at only 1/3 the weight. Crafted with A grade cells, ATEM POWER lithium LiFePO4 battery features bolted cell terminals for superior amperage delivery and conductivity. Our 12V 100Ah lithium-ion battery is engineered to deliver 2,000 rounds of usage, significantly outlasting lead-acid counterparts. It guarantees that you can rely on our LiFePO4 battery for extended periods without the need for frequent replacements. Our 12V 100Ah lithium-ion battery provides a reliable energy source for camping fridges, 12V lights, and high-power appliances like electric ovens and space heaters thanks to its capability of max 200A (≤7S) / continuous 100A discharge current with built-in BMS protection. Features
A Grade Cell: Crafted with A grade cells, our lithium LiFePO4 battery boasts bolted cell terminals for enhanced amperage delivery and superior current conductivity.
Extended Lifespan: With the ability to provide impressive 2,000 rounds of usage, ATEM POWER LiFePO4 battery outlasts its lead-acid counterparts by multiple folds.
Lightweight Design: Our 12V 100Ah lithium-ion battery delivers twice the power of a comparable lead-acid battery at just one third of the weight.
High Power Output: With max 200A (≤7S) / continuous 100A discharge current, our LiFePO4 battery powers high wattage appliances like microwaves or coffee machines.
Rapid Charging: Featuring reduced internal resistance, our lithium battery boasts swift charging capability for a quick recharge process and shorter downtime between uses.
Unmatched Versatility: Our 12V 100Ah lithium-ion battery is designed to power camping fridges, 12V lights and more for your camping, RV, or backup application.
Flexible Configurations: You can connect two 12V 100Ah lithium-ion batteries in series or parallel to achieve your desired voltage and amp-hour capacity.
High Quality BMS: It offers protection against over or under temperature, high or low voltage, overload and short circuit, and smart cell balancing for enhanced reliability.
Safety Assured: Our lithium battery exhibits thermal stability, effectively eliminating explosion risks and maintaining optimal discharge performance from -20℃ to 70℃.
Lithium Battery
Nominal Capacity:
100Ah
Nominal Voltage:
12.8V
Life Cycle:
2,000 Cycles
Charge Voltage:
10V-14.6V
Max. Continuous Charge Current(25°C):
50A
Max. Continuous Discharge Current(25°C):
100A
Max. Charge Current:
50A
Max. Discharge Current(≤7S):
200A
Internal Impedance:
≤10mΩ
Charge Temperature:
0°C~60°C
Discharge Temperature:
-20~70°C
Standard Operation Temperature:
-20~70°C
Self-discharge Rate (per month):
2%
Max. Modules in Series/Parallel:
2S/2P
Package Dimension:
41cm x 26.5cm x 30cm.
Gross Weight:
13.65kg
25A DC-DC Charger
DC Input Voltage Range:
11V~24V
Solar Input Voltage Range:
9V~30V
Max. Input Current:
28A
Output Voltage:
0~15.4V
Max. Output Power:
385W
Rated Output Current:
25A
Standby Current:
<10mA
Charging Profile:
4 Stages
Battery Compatibility:
Lead Acid, AGM, Calcium, LiON(LiFePO4)
IP Rating:
IP-54
Operational Temperature:
-20℃~45℃
Storage Temperature:
-40℃~60℃
Humidity:
0%~90%
Package Size:
316mm(L) x 240mm(W) x 63mm(H)
Package Weight:
1.255Kg
Package Includes
1 x ATEM POWER 100Ah Lithium Iron Phosphate Battery
1 x ATEM POWER 25A DC-DC Charger with Anderson Style Plugs
Set of Screws & Nuts
3 x Anderson Style Plugs
1 x User Manual
Warranty
3 Years Warranty For Lithium Battery 1 Year Warranty For Battery Charger
CTEK D250SE Dual Input DC-DC 20A Smart Battery Charger 12V Lead Acid Lithium Car
Regular price
$599.00
Sale price
$560.95
Save $38.05
TheCTEK Dual Input D250SEis afully automatic,5 step chargerthatsupplies up to 20A of power to any 12V lead-acid or lithium service battery from 40–300Ah. It hasselectable charge algorithms for AGM and lithium batteriesand can use power through itsdual input from alternator,solar panelandwind power.
When the service battery is fully charged, the D250SE willautomatically redirect maintenance charge powerto the starter battery. The D250SE can maintain astable output up to 20A to vehicles fitted with smart ECU controlled alternatorsand also has a temperature sensor for optimised charging, regardless of weather conditions.
With award winning Swedish technology, theDual Input D250SEallows you to enjoy your vehicle more with maximized battery capacity as the ideal charger for vehicles without access to a mains power supply.
Specification
Brand:CTEK
Ambient temperature:-20˚C to +50˚C (- 4°F to +122°F)
Atem Power 12V 100Ah Slimline Lithium Battery + 12V 25A DC to DC Battery Charger
Regular price
$1,193.00
Sale price
$958.00
Save $235.00
With a profile as slim as 5cm, ATEM POWER 100Ah slimline lithium battery is your ultimate solution for limited space installation, whether tucked behind or under a seat or at the back of your 4x4, providing unmatched power where conventional LiFePO4 batteries won't fit. Crafted with A grade prismatic cells, our slimline lithium-ion battery excels in energy density and consistency, serving as a reliable energy source for various applications, including camping fridges, 12V lights, and high-power appliances such as electric ovens and space heaters. Our slimline lithium iron phosphate battery is perfect for use with caravans, camper trailers, motor homes and 4x4. The SPCC enclosure, manufactured to Japanese standard JIS G 3141, is 20% stronger than typical hot rolled steel to protect battery cells. Our lithium-ion slim battery provides impressive lifespan of 2,000 cycles with 80~90% usable capacity, delivering exceptional longevity and optimal performance. Features
Remarkably Slimline: Measuring as thin as 5cm, ATEM POWER 100Ah slimline lithium battery easily fits behind or underneath seats, or at the rear of your 4x4.
SPCC Enclosure: The Japanese standard SPCC steel with glossy finish offers 20% more strength than standard hot rolled steel for superior cell protection.
A Grade Cell: Crafted with A grade prismatic cells, our LiFePO4 battery boasts higher energy density and consistency, while being more resistant to vibration-induced failures.
Extended Lifespan: Our LiFePO4 battery provides impressive 2,000 rounds of usage with 80~90% usable capacity, significantly outlasting its lead-acid counterparts.
Lightweight Design: Our slimline lithium-ion battery delivers twice the power of a comparable AGM battery with half the weight, even within a SPCC steel enclosure.
High Power Output: With max 200A (≤7S) / continuous 100A discharge current, our LiFePO4 battery powers high wattage appliances like microwaves or coffee machines.
Rapid Charging: Featuring low internal resistance, our LiFePO4 battery boasts swift charging capability for a quick recharge process and shorter downtime between uses.
High Quality BMS: It offers precise voltage and temperature monitoring with smart cell balancing for enhanced reliability, and low self-discharge rate for sustained charge.
Real Time Monitoring: The voltmeter displays the capacity and voltage, while the dual 120A Anderson style plugs facilitate high current charging and discharging.
Flexible Configurations: You can connect two slimline lithium iron phosphate batteries in series or parallel to achieve your desired voltage and amp-hour capacity.
Lithium Battery
Brand:
ATEM POWER
Colour:
Black
Nominal Capacity:
100Ah
Nominal Voltage:
12.8V
Life Cycle:
2,000 Cycles
Case Material:
SPCC Steel, According to Japanese Standard JIS G 3141
Max. Continuous Discharge Current(25°C):
100A
Max. Charge Current:
50A
Max. Discharge Current(≤7S):
200A(≤7S)
Internal Impedance:
≤10mΩ
Charge Temperature:
0°C~60°C
Discharge Temperature:
-20~70°C
Standard Operation Temperature:
-20~70°C
Self-discharge Rate(per month):
2%
Max. Modules in Series/Parallel:
2S/2P
Package Dimension:
68cm x 37.5cm x 13.5cm
Gross Weight:
18.35kg
25A DC-DC Battery Charger
DC Input Voltage Range:
11V~24V
Solar Input Voltage Range:
9V~30V
Max. Input Current:
28A
Output Voltage:
0~15.4V
Max. Output Power:
385W
Rated Output Current:
25A
Standby Current:
<10mA
Charging Profile:
4 Stages
Battery Compatibility:
Lead Acid, AGM, Calcium, LiON (LiFePO4)
IP Rating:
IP-54
Operational Temperature:
-20℃~45℃
Storage Temperature:
-40℃~60℃
Humidity:
0%~90%
Package Size:
316mm(L) x 240mm(W) x 63mm(H)
Package Weight:
1.255Kg
Package Includes
1 x ATEM POWER 100Ah Slimline Lithium Iron Phosphate Battery
1 x ATEM POWER 25A DC-DC Charger with Anderson Style Plugs
Set of Mounting Kit
3 x Anderson Style Plugs
1 x User Manual
Warranty
3 Years Warranty For Lithium Battery 1 Year Warranty For Battery Charger
Regular price
$1,441.00
Sale price
$1,200.00
Save $241.00
Not much room for a dual battery system in your vehicle? This power hub is designed to be fit in the gaps, behind a seat or adjacent to slide out storage assemblies. And this power hub features an in-built 40A DC-DC charger with solar input, which makes it easy to disconnect or connect the dual battery system. The ATEM POWER slimline lithium battery features prismatic cells which are more stable and shock-resistant than cylindrical cells. And the power hub with 40A DCDC comes in a robust steel case with powder coated finish for added durability. This slimline lithium battery with in-built 40A DC-DC charger is less than half the weight of a lead acid battery yet doubles the usable power for huge weight saving. And the power hub can deliver up to 2,000 rounds, several times that of a lead-acid battery so you don’t need to constantly replace your power hub. The Anderson plugs & cigarette socket allow this power hub to be neatly connected and easily removed for different applications. Features
In-Built DC-DC Charger: This slimline lithium battery features an in-built DC-DC charger for superior convenience.
Solar Input: This power hub with 40A DCDC can directly and effectively pull power from solar panel with the Anderson plug for solar input.
Slimline Design: This power hub can fit in the tightest spaces thanks to its slimline shape and is less than half the weight of an equivalent lead-acid battery.
Prismatic Cells: Prismatic cells of this slimline lithium battery provide better performance than cylindrical cells as they are more stable and shock-resistant.
Longer Life: This ATEM POWER power hub is a win in lifespan as you can get 2,000 cycles, several times the life expectancy of standard lead-acid batteries.
High Quality BMS: It provides 100A max. continuous discharge current & 200A (≤7S) max. pulse discharge current and monitors and optimizes each cell.
Output / Input Studs: This power hub with 40A DCDC comes with inverter suitable output / input studs.
Premium Battery Monitor: The battery monitor allows you to easily check the battery’s real-time status.
Universal Fitment: Our RV battery monitor is compatible with all common battery types, including lithium, lead-acid (AGM, gel, wet), and nickel-metal hydride.
Super Versatile: With this RV battery monitor, you'll always know the state of your deep-cycle battery, whether it's in a 4WD, RV, or boat solar system.
LiFePO4 Battery
Nominal Capacity:
100Ah
Energy:
1,280Wh
Nominal Voltage:
12.8V
DC Input Voltage:
11.3~24.0V
Solar Input Voltage:
13.0~26.0V
Charge Cut-off Voltage:
14.6V
Discharge Cut-off Voltage:
10.0V
Max. Charge Current (With 50A Anderson Plug):
40A
Max. Charge Current (With 120A Anderson Plug):
50A
Max. Pulse Discharge Current:
200A (≤7S)
Max. Continuous Discharge Current:
100A
Cycle Life:
2,000 Cycles
Operation Temperature:
-20~+70℃
Case Material:
Steel
In-Built DCDC Charger
DC Input Voltage:
11.3~24.0V
Solar Input Voltage:
13.0~26.0V
Max. Input / Output Current:
40A
Charging Voltage Range:
7.0~14.4V
Idle Power Consumption:
<10mA
Operation Temperature:
-20~+45℃
Battery Monitor
Working Voltage:
5.0~64.0V
Voltage / Current / Capacity Accuracy:
±1%
Package Size:
780 x 320 x 125mm
Package Weight:
18.55Kg
Package Includes
1 x 100Ah Power Hub with 40A DCDC
10 x Mounting Brackets
1 Set Of Mounting Hardware
1 x Battery Monitor
1 x Shielded Wire
1 x 120A Anderson Plug (Grey)
1 x 50A Anderson Plug (Red)
1 x 50A Anderson Plug (Grey)
1 x User Manual
Warranty
5 Years Warranty
Atem Power 12V Control Box W/ 1500W/3000W Inverter Smart Control Hub Built-in 40A DCDC Charger
Regular price
$875.00
Sale price
$729.00
Save $146.00
Whether you're powering multiple devices in your RV, boat, or off-grid setup, our 12V control box provides efficient power distribution and unrivalled convenience. The built-in 40A DCDC charger simplifies wiring setup, and the flush-mounted fuse holder maximizes space efficiency, achieving a clean and organized look. ATEM POWER 12V control box includes two AC sockets, three cig sockets, USB Type-A and Type-C sockets, ensuring compatibility with a wide range of devices. Whether you need to charge your phone, power up your laptop, or run other electronic equipment, our 12V control hub has got you covered. The integrated 1500W inverter allows you to power various appliances and devices. From TVs to kitchen equipment, our 12V control box handles it all with ease. Thanks to the 50A Anderson plugs, you can conveniently extract power from your start battery or solar panel. Upgrade to our 12V power control box and take control of your power like never before. Features
Smart Power Management: Our 12V control box enables convenient control and distribution to your devices, providing unmatched flexibility in your 12V electrical setup.
Smart Power Hub: The built-in 40A DCDC charger allows you to conveniently extract power from your start battery or solar panel through the 50A Anderson plugs.
Multiple Sockets: Our 12V control box includes two AC sockets, three cig sockets and USB sockets (Type-A & Type-C), ensuring compatibility with a wide array of devices.
Integrated Inverter: Our 12V control hub features an integrated inverter with continuous output power of 1500W, allowing you to power various appliances & devices.
Ultimate Customization: Our 12V control hub allows you to wire three added accessories according to your needs and label them using the included sticker sheet.
Embedded Fuse Holder: Flush-mounted fuse holder maximizes space efficiency and maintains a neat appearance, while 7 spare fuses are included for your convenience.
Digital Voltage Indicator: ATEM POWER 12V power control box includes a digital voltage indicator, providing real-time monitoring of the battery voltage.
Pre-Wired Switches: Our 12V control box comes pre-wired with fused power, providing hassle-free control over connected devices and added accessories.
Durable Construction: Our 12V control hub is constructed with high-quality steel and features matte black powder coating for aesthetic appeal and added protection.
Versatile Cable Access: With cable access points on all four sides, our 12V control box offers convenient and flexible options for cable routing and organization.
Box Material:
Steel
Coating:
Black Powder Coating
Box Size:
570mm(L) x 400mm(W) x 70mm(H)
Lid Thickness:
3
Box Thickness:
3
Recommended Fuse Size for Batteries:
1~50A
Recommended Cable Size for Batteries Depending on Length:
0~1m = 2 x 6 AWG UL1015 1~3m = 2 x 4 AWG UL1015 3m+= 2 x 2 AWG UL1015
Integrated Inverter Continuous Output Power
1500W
Integrated DCDC Rated Charge Current
40A
Switch Specifications
12V 20A Max Current
AC Socket Specifications
240V (AUS) OR 220V (CHN) OR 120V (USA) OR 100V (JPN) 230V (EUR) 1500W shared between both sockets
Cig Socket Specifications
12V, 8A MAX
USB Socket Specifications
USB Socket 1: Type-A 5V 1A & Type-A 5V 2.1A USB Socket 2: Type-A QC 18W & Type-C PD 18W
Anderson Plug Specifications
Grey 175A Anderson Plug (DC input / output, input 10~16V) Red 50A Anderson Plug (DC input, MAX 24V 40A) Grey 50A Anderson Plug (solar input, MAX 26V MAX 40A)