Features

• Professionally assembled wiring loom suitable for driving lights
• Most of the wire ends are terminated with spade/plug or ring fitting for quick fitment
• The on/off switch is a pressing button type with adhesive backing for easy mounting
• The switching relay is rated to 40A so you could wire 10 or more driving lights (depending on the wattage)
• Has a built in 30A replaceable fuse holder too. This is a convenience way to wire your driving lights

Package Includes

• Up To 500W Load Capacity: 2 Lead wiring harness with On/Off sealed rocker switch, blue laser rocker switch for perfect visual effect and use experience.
• Easy to Install: Just plug and play, 24V DC, 40A power relay, 30A blade fuse, 20A laser ON/OFF rocker switch.
• More than 12 Feet of Wiring: 6Ft of wiring from relay to lights, 2 sets of power connectors to light fixtures.
• Universal Fitment: Compatible with all vehicles or boats (12-24V), used for all LED lights bar and work lights.
• Dual Protection Wiring System: 40A Power Relay & Inline Blade Fuse for multiple safety protection.

Have you been looking for a wiring harness that offer universal compatibility (e.g. LED light bar, driving light, headlight and fog light) to simplify installation process, then this 2 way wiring harness must be the one you cannot afford to miss.

Supplied with HB3 and H4 piggy back adaptors, this 2 way wiring harness is 100% plug & play, and spares you the trouble to cut or solder extra wires to fit the factory headlight of your high beams.

In addition, this 2 way wiring harness is also equipped with a microprocessor, which automatically detects whether the system is positive or negative switched, to deal with complex wiring system. And this harness also has 2 DTP to DT connectors for your driving light, and dual output, which features a max load of 35A@12V and a high current 12AWG copper wire, allows this wiring harness to run a variety of lights, including high performance LED spot light. The switch of this ADR compliant wiring harness is waterproof to resist harsh environments.

Features

• Universal Compatibility: This 2 way wiring harness is designed to provide cross compatibility for your LED light bar, driving light, headlight and fog light, etc.
• Plug & Play: This harness includes HB3 and H4 piggy back adaptors to fit the factory headlight of your high beam without cutting or soldering wires.
• Bridge The Divide: This wiring harness perfectly accommodates the DT or DTP connectors used in your driving lights with its supplied DTP to DT connectors.
• Built-In Microprocessor: The microprocessor, designed to deal with complex wiring system, will automatically detect whether it is positive or negative switched.
• Heavy Duty: A max load of 35A@12V and a high current 12AWG cable allow it to run virtually any lights from high performance driving lights to spot lights.
• ADR Compliant: This wiring harness is designed to only turn on auxiliary lights when high beam is triggered, making it ADR compliant.
• Waterproof Switch: This switch has been built with waterproof performance to resist harsh environments including moisture, water and other elements.
• Sturdy Construction: This copper wire is protected by a thermoplastic jacket that is heat and UV resistant, ensuing long last durability.
• Super Longevity: The switch has been strictly tested to provide over 10,000 times pressing under normal use.