Enerdrive PWM 30A Solar Charge Controller benefits include:

• Protects battery from overcharge and discharge
• 12/24V auto detect
• Handles up to 30 Amps of Array Current
• Handles up to 450 Watts of solar power
• Maintenance free protection of your solar panel and batteries
• Maintains battery voltage
• Maintain 12/24V batteries in a fully charged state

Product Features:

• Informative backlight LCD display indicates solar charge input, charge/load output Volatage/Amps
• Selectable battery type Sealed, Flooded & Gel
• 2 x USB Outputs 2.4A
• Full output operation up to 55oC
• Temperature compensation
• High precision on voltage set point
• Wall mountable

  Specifications

  Enerdrive Part Number	EN43030
  Battery Voltage Input	12/24 Vdc
  Max. PV panel open circuit voltage	12V-20VOC - 24V-50VOC
  Maximum charge current	30A
  Maximum load current	30A
  Operational Current (no load & no PV)	12V -18mA 24V -14.5mA
  Battery Type	Sealed (Default) / Gel/ Flooded
  Bulk/Absorption Charging Voltage	Sealed: 14.4V/ Gel:14.2V/ Flooded 14.6V
  Equalize Charging Voltage	Sealed: 14.4V/ Gel:14.2V/ Flooded 14.8V
  Float Charging Voltage	Sealed/ Gel/ Flooded: 13.8V
  Low Voltage Disconnect	Sealed/ Gel/ Flooded:11.1V
  Low Voltage Reconnect	Sealed/ Gel/ Flooded:12.6V
  Temp Compensation Coefficient	-18mV/°C >25°C@12V / -36mV/°C >25°C@24V
  Charge circuit voltage drop	0.29V
  Discharge circuit voltage drop	0.16V
  Battery Chargers Stages	2 Step: Bulk and Float
  LCD temperature range	-20 ̊C+70 ̊C
  Operating temperature	-25 ̊C+55 ̊C
  Relative humidity	95% N.C.
  Enclosure	IP30
  Grounding	Common Positive
  USB output	5VDC/2.4A (Total)
  Dimensions (L x W x H)	181 x 101 x 60mm
  Weight	0.55 Kg
  Terminals	16mm2 - 6AWG
  Warranty	3 Years
  Note: Specifications subject to change without notice.

20A Battery Charger Features:

• Multistage Charging: Fully automatic multistage battery charger with the ability to charge 3 separate battery banks.
• Separate Battery Banks: Isolated charging design where battery bank one is separate from battery bank two and three.
• Programmable: Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3.
• Current Control: User adjustable current output (e.g. Dial the 60amp unit back to run off a 1kVA generator).
• Smart Charging: The ePOWER 20A battery charger will regulate its output based on the loads connected to your battery banks.
• Wide AC Input Range: Operates on both 110V / 60Hz and 240V / 50Hz.
• LED Display: Easy to use “set and select” menu along with scrolling charger status.
• Silent Mode: Disables the cooling fan for total silent operation at night or whenever required. Activation reduces charge output by half and locks out fan for 12 hours.
• Temperature Sensor: Battery temperature sensor included with 3 meter cable.
• 5 Year Warranty from an Australian company renowned for customer support.

Multistage Charging Process

The Enerdrive ePOWER 20A Battery Charger is a fully automatic, “set and forget” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently.

As dictated by battery manufacturer’s recommendations, batteries require a multistage charge sequence for perfect, fast and accurate charging. Our ePOWER multistage smart 20A battery charger delivers four primary charge stages:-

• Stage 1 – Bulk or Boost Charge; The battery is charged at full rated output current of the charger until the battery reaches its final charging voltage, known as its absorption voltage. In this step, around 80% of the battery capacity is recovered as fast as possible.
• Stage 2 – Absorption Charge; With the charger voltage held steady the remaining 20% is replaced allowing the current to drop as the battery approaches its full charge.
• Stage 3 – Float; Finally, in the float stage the charger voltage is lowered and held at a constant and safe predetermined level. This prevents the battery from being overcharged while supporting any additional loads connected to the battery, such as DC lighting and refrigerators. This stage allows for the charger to be used as a DC power supply.
• Stage 4 – Maintenance; This stage is a regular timed “return to bulk” stage. After 7 days of constant operation in “float” the Enerdrive ePOWER Battery Charger will switch the charger from float to bulk to agitate the batteries electrolyte helping to provide an extended service life.

1 PRIORITY – Charge Where You Need it Most

The ePOWER 20A Battery Charger delivers a priority charge to Bank 1, or your main house battery bank which allows the charger to get this bank recharged the quickest, then transition the cycle to the lesser bank 2 & 3 batteries.

The priority function also allows you to have a battery chemistry different to the other two, such as an AGM battery for house and lead calcium for your start banks.

In the event that all 3 banks are in need of a charge, an over-ride function helps recover all 3 banks quickly and evenly before switching back to prioritise on Bank 1.

All About Lithium

The recent advances in high capacity Lithium battery technology have seen the need to develop a battery charger suited to their needs. With most traditional ‘smart’ chargers their suitability to Lithium batteries is limited. Lithium batteries require a constant current / constant voltage charge algorithm and are unique in that almost every amp-hour of charge delivered by the charger is accepted as one amp hour into the battery, hence the need to deliver a constant current as long as possible.

The Enerdrive ePOWER charger can be programmed for Lithium batteries. This setting delivers the full rated output of the charger constantly with the charger switching to power supply mode once the voltage peak is met (indicating a full battery bank). The graph shows the ePOWER charger algorithm perfectly supporting Lithium battery requirements.

The Display Panel

The ePOWER 20A Battery Charger display gives you all the information you need for the operation of your charger. At a glance, key information such as charger amps, battery voltage and charge state continually alternate on the screen.When in float / power supply mode, the load amps are displayed so you can see exactly what the charger is doing. The display also allows you to program all settings of the charger, as well as activate the silent mode.

Silence when you need it – By pressing the “SEL” button for 5 seconds, the ePOWER Charger enters the ‘Silent’ mode that prohibits the fan from working. This ensures totally silent and safe operation at night, ideal if the charger is located close to your sleeping quarters. Silent mode limits current output to no more than 50%, and is programmed to remain on for 12 hours before automatically returning to a normal ‘fan-on & full output’ setting.

Battery Temperature Sensor

Included standard with all ePOWER Battery Chargers.

Specifications

Enerdrive ePOWER Battery Charger Specifications

Features

With ePOWER’s state of the art, easy to use design, this 600W inverter will offer you reliable service for providing AC power and 5V USB power for your home, boat, caravan, 4WD or commercial vehicle.

The Enerdrive ePOWER 600W Inverter can run many AC powered appliances when you need AC power anywhere. The 5V USB power can charge many USB powered devices.

• Australian GPO Outlets
• True sine wave output is ideal for operating motor loads, and to reduce stress on surge protection circuitry, meaning potentially longer equipment life
• Audio alarm with warning/error codes to alert user to check inverter condition before unit shutdown
• Automatic shutdown protects overload, over temperature and low/high battery conditions
• High surge capacity for products that require more power to start (2 x constant)
• High efficiency conversion of battery available power to AC power
• Mounting brackets for permanent installation
• Heavy duty DC battery stud connectors
• Includes 5V USB port

Specifications

• AC Output Power 600W
• AC Output Current 2.6A
• AC Surge Power (Peak) 900W
• AC Output Voltage 230 Vac / 50 Hz
• AC Output Waveform True Sinewave
• AC Output Socket 1 outlet
• Nominal DC Input Voltage 12.5 VDC
• No Load battery draw < 0.8 ADC
• DC Input Voltage operating range 10.5 – 15.9 VDC
• Under Voltage Alarm 11.0 VDC
• Under Voltage Shutdown 10.5 VDC
• Under Voltage Recovery 12.0 VDC
• Over Voltage Shutdown 15.9 VDC
• USB 5V, 2.1A
• Safety and Environmental
• Conformance All required Australian Standards
• Agency Markings RCM
• Operating Temperature 0°C to 40°C
• Storage Temperature -20°C to 60°C
• Relative Humidity 5-90% noncondensing
• Weights and Dimensions
• Weight 2.0Kg
• Dimensions (W x L x H) 175 x 237 x 89mm
• Warranty 2 Years

Features

Enerdrive Solar Charge Controller benefits include:

• Protects battery from overcharge and discharge
• Only for 12 Volt solar panels and batteries
• Handles up to 10 Amps of Array Current
• Handles up to 180 Watts of solar power
• Maintenance free protection of your solar panel and batteries
• Maintains battery voltage
• Maintain 12V batteries in a fully charged state

Product Features:

• LED status indicator provides quick reference to Charger, Battery and load status
• Selectable battery type
• Temperature compensation
• High precision on voltage set point
• Wall mountable

  Specifications

  Enerdrive 12 V 10 A / 20 A Solar Charge Controllers

  Enerdrive Part Number	EN41010	EN41020
  Battery voltage	12 Vdc	12 Vdc
  Max. PV panel open circuit voltage	26 Vdc	26 Vdc
  Maximum charge current	10A	20A
  Maximum load current	10A	20A
  Maximum load current	20 A for 1 minute	40 A for 1 minute
  Operational Current (no load & no PV)	<10 mA	<15 mA
  Regulated battery charging voltage
  Flooded Battery	14.6 Vdc	14.6 Vdc
  Sealed Battery	14.2 Vdc	14.2 Vdc
  Operational Current (no load & no PV)	<10 mA	<10 mA
  Voltage across terminal (PV to Battery)	<0.15 Vdc	<0.15 Vdc
  Voltage across terminal (Battery to Load)	<0.10 Vdc	<0.10 Vdc
  PV Reverse Polarity Protection	Yes
  Battery Overcharge Protection
  Flooded Battery	14.6 Vdc	14.6 Vdc
  Sealed Battery	14.2 Vdc	14.2 Vdc
  Load Overdischarge Protection	<11.5 Vdc	<11.5 Vdc
  Load Reconnected Voltage	12.6 Vdc	12.6 Vdc
  Battery Chargers Stages	2 Step: Bulk and Float
  Recommended Wire Size	#12 AWG	#10 AWG
  Operating temperature	-40°C – 60°C	-40°C – 60°C
  Dimensions (H x W x L)	3.4 x 10.5 x 10.5 cm
  Weight	0.3 Kg
  Warranty	2 Years
  Note: Specifications subject to change without notice.

Features

With Enerdrive breaking into the 4WD canopy market in recent years, we have been consistently asked by manufactures and end users to come up with a compact power solution to operate all of the electrical equipment that is ending up in the back of these canopies. From a simple system to operate a fridge and a couple of lights to a full on power station, these are the type of systems we have been asked for.

After many brainstorming sessions and 3D modelling designs, Enerdrive have produced 3 models to cover just about any customer request for power in their canopies.

PLEASE NOTE THAT THESE UNITS ARE BUILT TO ORDER AND TURN AROUND TIME IS APPROX 4-6 WEEKS

The Explorer:

This system is designed for the end user only requiring a minimum power option in a neat package. Available in 3 different versions;

1. K-EXPLORER-01 inc ePRO PLUS Battery Monitor
2. K-EXPLORER-02 inc Simarine Battery Monitoring
3. K-EXPLORER-03 inc Simarine & Individual Load Monitoring

The Explorer 01 for example consists of the following items

• Enerdrive ePOWER DC2DC40+ Vehicle/Solar Charger
• 1 x ePRO Plus Battery Monitor
• 4x Pre-wired Circuit Breakers for main power equipment
• 4 x Contura switches for Lights & Auxiliary loads
• Pre-wired 35mm2 Main Battery Cable Connection with Main DC Fuse
• 1 x Fridge 50A Anderson Plug connection
• 1 x 12v CIG & 1 x Dual 2.4A USB sockets come standard. You can choose a mixture of Twin USB 2.4A Hi Amp sockets to charge your mobile devices or mix it up with 2 x 12v Output Socket. The choice is yours at time of order.
• Battery Reset button for kick starting your flat battery from the DC2DC Charger

All Explorer systems are pre-wired by Enerdrive so the only cabling required at installation time is load outputs & vehicle/solar/tank inputs

All systems are built into a unique compact box arrangement and designed to mount for example on either the front or rear bulkhead of a vehicles canopy. The systems are available in either Left (Passenger side) or Right (Drivers side) or Roof Mount installation. Any brand of battery is suitable from Wet Sealed, AGM, Gel and Lithium.

If you are interested in having custom engraving for switch/circuit breakers to your specific requirements, this option is available at an additional cost.

Please be aware that the Enerdrive Flat Battery restart button is only to be used when start system input is 12v only. This button is not suitable for use in 24v starting systems. If you do require restart facilities for a 24v start system please speak to the Enerdrive team. We can modify these systems to be suitable for 24v start systems at an additional cost.

Enerdrive are proud to bring to market this innovative design that can be installed by the manufacturer or end user in a neat one piece installation.

Specifications

Features

With Enerdrive breaking into the 4WD canopy market in recent years, we have been consistently asked by manufactures and end users to come up with a compact power solution to operate all of the electrical equipment that is ending up in the back of these canopies. From a simple system to operate a fridge and a couple of lights to a full on power station, these are the type of systems we have been asked for.

After many brainstorming sessions and 3D modelling designs, Enerdrive have produced 3 models to cover just about any customer request for power in their canopies.

PLEASE NOTE THAT THESE UNITS ARE BUILT TO ORDER SO TURN AROUND TIME IS APPROX 4-6 WEEKS

The Traveller:

This system is designed for the end user requiring a higher level of power requirements along with AC charging ability. Available in 3 different versions;

1. K-TRAVELLER-01 inc ePRO PLUS Battery Monitor
2. K-TRAVELLER-02 inc Simarine Battery Monitoring
3. K-TRAVELLER-03 inc Simarine & Individual Load Monitoring

The Traveller 01 for example consists of the following items

• Enerdrive ePOWER DC2DC40+ Vehicle/Solar Charger
• Enerdrive ePOWER 40A AC charger
• 1 x ePRO Plus Battery Monitor (K-TRAVELLER-01)
• 4x Pre-wired Circuit Breakers for main power equipment
• 4 x Contura switches for Lights & Auxiliary loads
• Pre-wired 35mm2 Main Battery Cable Connection with Main DC Fuse
• 1 x Fridge 50A Anderson Plug connection
• 1 x 12v CIG & 1 x Dual 2.4A USB sockets come standard. You can choose a mixture of Twin USB 2.4A Hi Amp sockets to charge your mobile devices or mix it up with 2 x 12v Output Socket. The choice is yours at time of order.
• Battery Reset button for kick starting your flat battery from the DC2DC Charger
• Simarine LCD Battery WIFI Monitoring System with option to incorporate individual load/charge information. (K-TRAVELLER-02 & 03)
• Optional Water/Fuel Tank module also available. (K-TRAVELLER-02 & 03)

All Traveller systems are pre-wired by Enerdrive so the only cabling required at installation time is load outputs, battery connection & vehicle/solar/tank inputs

All systems are built into a unique compact box arrangement and designed to mount for example on either the front or rear bulkhead of a vehicle canopy. The systems are available in either Left (Passenger side) or Right (Drivers side) or Roof Mount installation. Any brand of battery is suitable from Wet Sealed, AGM, Gel and Lithium.

If you are interested in having custom engraving for switch/circuit breakers to your specific requirements, this option is available at an additional cost.

Please be aware that the Enerdrive Flat Battery restart button is only to be used when start system input is 12v only. This button is not suitable for use in 24v starting systems. If you do require restart facilities for a 24v start system please speak to the Enerdrive team. We can modify these systems to be suitable for 24v start systems at an additional cost.

Enerdrive are proud to bring to market this innovative design that can be installed by the manufacturer or end user in a neat one piece installation.

• Monstrous Pulling Power: A 6.0 HP motor guarantees 14,500 pounds pulling capacity, ensuring sufficient power to recover your stuck vehicle.
• Stronger Gear Ratio: Geared lower but deliver stronger and faster winching performance than previous generations.
• Dual Remote Control: This wireless winch comes with the dual remote control mode, including 25 meters of wireless control
• Re-engineered Brake: This brake has been thoroughly upgraded to deliver ultra braking performance against the toughest situations.
• Cooper Core Terminal: This design can effective keep oxidation, corrosion and rust at bay, and features superior conductivity.
• Premium Synthetic Cable: The upgraded version---9.5mm*26m synthetic rope features an amazing breaking strength of 23,809lbs.
• Cradle Included: This tough constructed winch mounting plate is suitable for trucks, SUVs, Jeep, pickups, UTV, ATV, 4x4, trailers and any 4WD vehicles.
• Designed for vehicle recovery only, particular for ATV, UTV& 4x4. It is not only more efficient, but quieter as well.
• Note: Avoid angle pull. The winch line should not exceed a 15° up and down for horizontal or a 45° angle left or right from straight ahead.

• Monstrous Pulling Power: A 6.6 HP motor guarantees 17,500 pounds pulling capacity, ensuring sufficient power to recover your stuck vehicle.
• Stronger Gear Ratio: Geared lower but deliver stronger and faster winching performance than previous generations.
• Dual Remote Control: This wireless winch comes with the dual remote control mode, including 25 meters of wireless control
• Re-engineered Brake: This brake has been thoroughly upgraded to deliver ultra braking performance against the toughest situations.
• Cooper Core Terminal: This design can effective keep oxidation, corrosion and rust at bay, and features superior conductivity.
• Premium Synthetic Cable: The upgraded version---9.5mm*26m dyneema synthetic rope features an amazing breaking strength of 23,809lbs.
• Unparalleled Warranty: An one-year warranty and free lifetime technical support prove to be a testament to its quality assurance.
• Designed vehicle recovery only, particular for ATV, UTV& 4x4. It is not only more efficient, but quieter as well.
• Note: Avoid angle pull. The winch line should not exceed a 15° up and down for horizontal, or a 45° angle left or right from straight ahead.

• Heavy duty steel construction 3 Bike Carrier Rack
• Durable powder coat finish to to be anti-rust
• Super thick and sturdy Foam Rubber, difficult to fall off
• Free welding technology & Unique arc design
• Padded frame keeps bicycles away from vehicle
• Flexible to adjust the angle of arms without tools
• Included 6 tightening straps which passed through SGS 5000 circles Test

• Designed vehicle recovery only, particular for ATV, UTV.It is not only more efficient, but quieter as well.
• Powerful sealed 1.9 HP motor and a full metal 3-stage planetary gear train that makes line speed faster under load.
• Equipped with a gear reduction ratio of 153:1 and a Three-stage planetary gear train, a guarantee for stronger pulling capacity.
• Designed for solid performance against corrosion and moisture, a great bonus for those living in rainy and stormy areas.
• Noted: Pls. connect two long wires to power supply, and connect two short wires to motor!
• This winch is designed only for pulling along a horizontal surface not for lifting a load under any circumstances. When winching, you should stop pull the wire rope when red coloured warning appears.
• Do not operate the winch at an angle of more than 15°, because angles greater than this will deform or damage parts of the winch.
• When hoisting, the winching capacity is only 1/5 compared with pulling along a horizontal surface. Always ensure the clutch is fully engaged or disengaged. Failure to do so will significantly reduce winching capacity.
• It is highly recommended to use batteries of more than 80A. Failure to do so will also reduce the winching capacity.
• Note: Avoid angle pull. The winch line should not exceed a 15° up and down for horizontal, or a 45° angle left or right from straight ahead.

• Utmost Security: Storing less potential energy, this soft shackle is safer than a traditional steel one in case of a recovery point failure or incorrect shackle attachment.
• Optimal Design: The winch ring features large bend radius to reduce stress on soft shackle, as well as deep flange & circular groove to center the rope stably.
• Remarkable Strength: Made of 12 strands braided ultra tough UHMWPE, this soft shackle features distinguished breaking force of 33,000lbs (15,000kg).
• Premium Working Load: The recovery ring operates at a superior working load of up to 17,600lbs (8,000kg) which makes a recovery safer and easier.
• Perfect Durability: This winch shackle is UV & abrasion resistant, and the snatch ring is made of T6 6061 aircraft grade aluminum which will not corrode.
• Added Protection: Heat shrink increases stability of diamond knot, and Nylon sleeve protects rope from abrasion & heating on long off-road trips.
• Easy-to-Use: Lightweight and easy to handle, this soft shackle can float in water hence won’t be cumbersome when pulling it.
• High Visibility: Vermilion color of the soft shackle is highly visible and recognizable and will make it more appealing.
• Complete Kit: This Fieryred 4x4 recovery kit includes a soft shackle with heat shrink & protective sleeve, an aluminum winch ring and a carry bag for storage.
• Superior Versatility: This towing winch shackle is ideal for boating, personal watercraft, farming, off-road recovery, etc.

Avoid tyre blow out, improve fuel efficiency and prolong tyres lifespan with this Gator BT Wireless 4 Sensor Tyre Pressure Monitor Kit.
A great solution for monitoring your vehicle's tyre pressure on the go.
This system comes with built-in Bluetooth, simply pair your phone to the tyre pressure monitors via the free app and view real-time pressures.
Screw on a sensor to each tyre valve and plug in the receiver into the vehicle's 12v accessory socket and you'll be able to see the pressure in each tyre on your phone.
You can even set warnings for tyre leaking, high pressure and low pressure.
Compatible with iOS 6.0 and above.
Like all common tyre pressure monitoring systems, sensors only transmit data when vehicle is in motion.
Suitable for use on Cars, Vans and Utes,

NOTE Not recommended for Trucks, Caravans or Trailers. (Max pressure for sensors is 50psi)

Features:
4x Sensors supplied, just simply screw into existing tyre valve
Monitor via your smart phone using the dedicated app
Set alerts for pressure loss or high/low settings
Anti-theft design

Car can't start? Pump not working? Engine conked out? And you realise that they all have a common problem. Flat battery. Now you can prepare for such unforeseen circumstances with our high performance Giantz 20A Battery Charger.

Built to exacting standards, the Giantz 20A Battery Charger is your godsend in bringing life to dead batteries. Equipped with integrated Pulse Width Modulation (PWM) to prevent power loss, the Charger provides continuous charge to a 12V battery with an automatic floating charge mode to avoid overcharging damage. That means safe charging with total peace of mind.

The Giantz 20A Battery Charger is equally useful to you on the road as it is in your workshop, garage or shed. Never let your power down again as you power up with Giantz.

Features:
Fully automatic operating system
Output over voltage protection
Over temperature protection
Short circuit protection
Automatic voltage stabilisation
Lightweight and portable
High quality battery clips w/ 90cm cable
Suitable for both gel-cell or wet-cell lead acid batteries
SAA approved

Specifications:
Brand: Giantz
Input voltage (AC): 210V-240V, 50Hz
Output voltage (DC): 12V-14.7V
Charging current: 20A
Output power (HP): 250W
Dimensions: 20 x 11 x 6cm
Weight: 1.2kg
Number of Packages: 1
Assembly Required: No

Product Contents:
1 x Giantz 20A Battery Charger
1 x User Manual

If you are looking for ways to power up your AC devices from a 12V source, you only need to hook up to the Giantz Pure Sine Wave Inverter.

The Pure Sine Wave Inverter produces a clean current without any signal interference. And that makes it perfect for running sensitive equipment such as computers, phones and TVs. Simply hook it up to your car, 4WD, caravan or boat battery and you can tap on the power to run your 240V appliances just like at home. Better still, the Wave Inverter can also power up running lights and refrigeration when there is a power outage at home.

Compatible with any 12V battery, the Wave Inverter uses reliable Japanese engineering capacitance and incorporates the latest IGBT inverter technology for a remarkable 90% high efficiency rate. It has a continuous output of 1500W and peaking at 3000W. It also has a convenient USB output and dual 240V sockets. Not least, the Inverter meets Australian specifications and has overloading, over-voltage and overheating protection.

With so much going for the Giantz Pure Sine Wave Inverter, you can be assured of constant clean power within easy reach anywhere, anytime. Get yours today.

Important note:
The power inverter is not compatible for use with inductive products that contain motors or transformers (such as air conditioners, power transformers and compressors). If power is supplied by the power inverter, it will cause damage to the motor and electronic board.
Compatible with:
Equipment: Computer, Printer, Monitors, Fax Devices, Scanner
Entertainment Electronics: TV, DVD-Player, Play Consoles, Hi-Fi Systems, Music
Instruments, Satellite Decoder
Household Appliances: Vacuum Cleaner, Fans, Electric Shaver, etc.
Kitchen Devices: Mixer, Ice Machines, kettle, Toaster etc.

Features
Reinforced thermal dissipating construction.
Reliable Japanese engineering capacitance
Copper magnetic core
Latest IGBT inverter technology
Ideal for sensitive electronics
Convenient USB output
Dual 240V sockets
Soft start and low interference technologies
90% remarkable high efficiency
Powers 220/240V devices from 12V sources
Continuous output of 1500W
Australian-standard power point
Low-battery alarm and safety shutdown
Short-circuit protection.
Overload, over-voltage and overheat protection.

Specifications:
Continuous power: 1500W
Peak power: 3000W
Thd: <3%
Output voltage and frequency: 220 - 240V, 50Hz.
Output wave: Pure sine wave.
Input voltage: 12V (DC 10V - 15V)
Static current: 0.5-1A
USB current: 5V, 2.1A
Battery low alarm protection: 10VDC±0.5V
Battery low shutdown protection: 9.5VDC±0.5V
Overload protection: Shuts down output and reset.
Output short circuit protection: Auto shut-off.
Over voltage protection: 15V±1V
Over temperature protection: >65°C±1°C
Maximum efficiency: 90% approx.
240V output socket: 2
USB socket: 1

Package Content
1 x GIANTZ Pure Sine Wave Inverter
2 x Power cable
1 x Manual

Come with a 12-month Warranty.

Climb your way to the top with the Giantz 2.6M Telescopic Ladder. Forget ladders that are heavy, bulky, awkward to store and hard to use - the Giantz Telescopic Ladder solves all your problems. Made from premium aluminium alloy and durable nylon fittings, the ladder is rust-resistant, incredibly stable and ready for all your DIY needs. The ladder fully extends to 2.6M and collapses neatly into an easy-to-carry 76cm tall, 5cm wide bundle with an easy-carry strap. The steps are a generous 4cm for stability and the legs are fitted with anti-slip end caps to prevent slippage and protect floors. The ladder has a secure lock to keep the steps in place, and a slow descent when collapsing to prevent trapped fingers. Easily reach high places in your home, in the warehouse, outside or on the road. Reach new heights with the Giantz 2.6M Telescopic Ladder.

Features
Extendable and space-saving
Premium aluminium alloy
Rust-resistant
Easy to carry
Non-slip rubber feet
Multi-purpose use
Steady steps
Durable nylon fittings
Easy reach for higher places

Specifications:
Material: Aluminium alloy and nylon
Step spacing: 27.5cm
Steps: 8
Weight: 6.5kg
Colour: Silver
Dimension: 74cm-260cm x 45cm (H x W)

Package Content
Telescopic ladder X1
User Manual X1

This product comes with 1 year warranty

If you looking for ways to power up your AC devices from a 12V source, you only need to hook up to the Giantz Pure Sine Wave Inverter.

The Pure Sine Wave Inverter produces a clean current without any signal interference. And that makes it perfect for running sensitive equipment such as computers, phones and TVs. Simply hook it up to your car, 4WD, caravan or boat battery and you can tap on the power to run your 240V appliances just like at home. Better still, the Wave Inverter can also power up running lights and refrigeration when there is a power outage at home.

Compatible with any 12V battery, the Wave Inverter uses reliable Japanese engineering capacitance and incorporates the latest IGBT inverter technology for a remarkable 90% high efficiency rate. It has a continuous output of 600W and peaking at 1200W. It also has a convenient USB output and dual 240V sockets. Not least, the Inverter meets Australian specifications and has overloading, over-voltage and overheating protection.

With so much going for the Giantz Pure Sine Wave Inverter, you can be assured of constant clean power within easy reach anywhere, anytime. Get yours today.

Important note:

The power inverter is not compatible for use with inductive products that contain motors or transformers (such as air conditioners, power transformers and compressors). If power is supplied by the power inverter, it will cause damage to the motor and electronic board.

Compatible with:

Equipment: Computer, Printer, Monitors, Fax Devices, Scanner

Entertainment Electronics: TV, DVD-Player, Play Consoles, Hi-Fi Systems, Music

Instruments, Satellite Decoder

Household Appliances: Vacuum Cleaner, Fans, Electric Shaver, etc.

Kitchen Devices: Mixer, Ice Machines, Kettle, Toaster etc.

Features:

• Reinforced thermal dissipating construction
• Reliable Japanese engineering capacitance
• Copper magnetic core
• Latest IGBT inverter technology
• Ideal for sensitive electronics
• Convenient USB output
• 240V sockets
• Soft start and low interference technologies
• 90% remarkable high efficiency
• Powers 220/240V devices from 12V sources
• Continuous output of 600W
• 1200W peak output
• Australian-standard power point
• Low-battery alarm and safety shutdown
• Short-circuit protection
• Overload, over-voltage and overheat protection

Specifications:

• Continuous power: 600W
• Peak power: 1200W
• Thd: <3%
• Output voltage and frequency: 220 - 240V, 50Hz
• Output wave: Pure sine wave
• Input voltage: 12V (DC 10V - 15V)
• Static current: 0.5-1A
• USB current: 5V, 2.1A
• Battery low alarm protection: 10VDC±0.5V
• Battery low shutdown protection: 9.5VDC±0.5V
• Overload protection: Shuts down output and reset
• Output short circuit protection: Auto shut-off
• Over voltage protection: 15V±1V
• Over temperature protection: >65°C±1°C
• Maximum efficiency: 90% approx.
• 240V output socket: 1
• USB socket: 1

Product Contents:

• GIANTZ Pure Sine Wave Inverter x 1
• Battery Clamp x 1
• Car Plug x 1
• Manual x 1